From Users: VisiLogic applications

17 files

1. Cumulating Timer

   By s.pratt

   Timer that accumulates the amount of time a condition is running.
   

   627 downloads

   Submitted July 9, 2014

2. V570 Alarms Example.

   By Guest

   V570 Alarms Example- how to.
   

   1,938 downloads

   Submitted June 27, 2010

3. Network tools

   By Guest

   Some examples for network tools: Ping, RFC-1305, DHCP.
   Code was written in Visilogic 8.0.1
   Any comments are welcome.
   Thanks in advance.
   

   940 downloads

   Updated September 2, 2010

4. pH subroutine

   By Memphis

   pH control subroutine
   

   830 downloads

   Submitted February 25, 2014

5. V570 Trends SD Example

   By Guest

   This sample application shows the Trends capabilities of Vision Color Display controllers.
   
   
   

   759 downloads

   Updated June 27, 2010

6. 2-Minute Timer

   By Guest

   2-minute timer for a more productive working environment. If the current task can't be completed in 2 minutes or less then place in a trusted, regularly updated system of lists.
   

   765 downloads

   Updated August 16, 2010

7. Pump PID Example Using V570 and E6B

   By Walkerok

   PID loop calculations showing on screen entry of variables for a fluid pump that can be set to control from either the suction side of the pump or the discharge side of the pump with Auto tune button added to the entry screen.
   

   1,288 downloads

   Updated December 3, 2017

8. UniCAN Examples

   By Guest

   These are some UniCAN examples for newbies. Real simple, just to set up the basics.
   The Master and Slave notation is arbitrary from the UniCAN point of view, but useful for clarity of explanation.
   Set up for V350/V570
   

   1,290 downloads

   Submitted September 1, 2010

9. CanOpen EXAMPLE

   By NOVI

   Hi
   Slightly modified Example for CanOpen protocol for V560
   on-line change of parameters & check IN and OUT
   send and save parameters in NODE
   and set parameters when NODE loses communication and the outputs remain active
   I have not been able to find any help for this problem anywhere and but to make it easier for someone
    
   Best regards  
   

   377 downloads

   • canopen interruption of communication

   Updated June 20, 2018

10. Modbus Client and Server over GPRS

    By s.pratt

    Example for remote Modbus communications over a GSM cellular modem.
    

    734 downloads

    Submitted December 2, 2015

11. IO-AI1X-AO3X Enable

    By Guest

    File to enable expansion module IO-AI1X-AO3X in VisiLogic. Extract and run
    

    282 downloads

    Submitted July 1, 2010

12. Oil and Water Dual tank level indication program

    By Walkerok

    This program shows a way to indicate two liquis levels in a single tank. Since you can not overlay two bar graphs on top of each other this is a work arround to be able two show two seperated fluids in the same space. Oil and Water in this case.
    

    740 downloads

    Submitted September 27, 2015

13. Programa1

    By EdwinCorrecha

    Hola, estoy trabajando en este código de escalera, pero tengo algunos problemas:
     
    1. El display de alarmas no siempre se activa cuando pulso el boton de mostrar las alarmas.
    2. el bit de activación con el disparo de la alarma se activa la primera vez, como tengo solamente la opción de reconocer y no de resetear, al momento de desactivarse desaparece, y cuando se vuelvo a activar la alarma el bit de disparo no se activa.
     
    Alguien podria decirme que estoy haciendo mal?  soy  principiante
     
    gracias
    

    333 downloads

    Submitted September 17, 2017

14. UA24 - Bits to Numeric + Linearization

    By Jas

    The program takes the status of I0 to I7, and changes the status of the respective bits in MI 1.
    Bits in the target register that are outside of the defined range are not affected.
    The value in MI 1 (8-bit) is then linearized to 12-bit for the analog output.
    

    256 downloads

    Submitted January 3, 2011

15. SD Write Delimited Line

    By Guest

    Example based on Unitronics SD Card Demo example, but only to demonstrate Writing a delimited line to SD. Added some additional controls for stopping and starting, resetting counter.
    

    343 downloads

    Submitted August 6, 2010

16. RS-485 & Enc inverter

    By NOVI

    Hello
     
    A simple application for connecting a Unitronics PLC V280 &Chinese inverter modell EDS V-300
     
    

    188 downloads

    Submitted June 20, 2020

17. Uni-Can Example

    By NOVI

    Hi to all Unitronics users
    Examples for UniCan with 3 RC EX-1 modules  and DI in  DI out  and AN in and AN out
     
    

    432 downloads

    • ex rc1

    Updated May 26, 2018