Jump to content

From Users: VisiLogic applications

Sign in to follow this  

16 files

  1. V570 Alarms Example.

    V570 Alarms Example- how to.

    1,631 downloads

    Submitted

  2. UniCAN Examples

    These are some UniCAN examples for newbies. Real simple, just to set up the basics.
    The Master and Slave notation is arbitrary from the UniCAN point of view, but useful for clarity of explanation.
    Set up for V350/V570

    1,097 downloads

    Submitted

  3. Network tools

    Some examples for network tools: Ping, RFC-1305, DHCP.
    Code was written in Visilogic 8.0.1
    Any comments are welcome.
    Thanks in advance.

    788 downloads

    Updated

  4. Pump PID Example Using V570 and E6B

    PID loop calculations showing on screen entry of variables for a fluid pump that can be set to control from either the suction side of the pump or the discharge side of the pump with Auto tune button added to the entry screen.

    784 downloads

    Updated

  5. V570 Trends SD Example

    This sample application shows the Trends capabilities of Vision Color Display controllers.


    624 downloads

    Updated

  6. 2-Minute Timer

    2-minute timer for a more productive working environment. If the current task can't be completed in 2 minutes or less then place in a trusted, regularly updated system of lists.

    598 downloads

    Updated

  7. pH subroutine

    pH control subroutine

    579 downloads

    Submitted

  8. Modbus Client and Server over GPRS

    Example for remote Modbus communications over a GSM cellular modem.

    506 downloads

    Submitted

  9. Oil and Water Dual tank level indication program

    This program shows a way to indicate two liquis levels in a single tank. Since you can not overlay two bar graphs on top of each other this is a work arround to be able two show two seperated fluids in the same space. Oil and Water in this case.

    470 downloads

    Submitted

  10. Cumulating Timer

    Timer that accumulates the amount of time a condition is running.

    454 downloads

    Submitted

  11. SD Write Delimited Line

    Example based on Unitronics SD Card Demo example, but only to demonstrate Writing a delimited line to SD. Added some additional controls for stopping and starting, resetting counter.

    313 downloads

    Submitted

  12. IO-AI1X-AO3X Enable

    File to enable expansion module IO-AI1X-AO3X in VisiLogic. Extract and run

    234 downloads

    Submitted

  13. UA24 - Bits to Numeric + Linearization

    The program takes the status of I0 to I7, and changes the status of the respective bits in MI 1.
    Bits in the target register that are outside of the defined range are not affected.
    The value in MI 1 (8-bit) is then linearized to 12-bit for the analog output.

    221 downloads

    Submitted

  14. Programa1

    Hola, estoy trabajando en este código de escalera, pero tengo algunos problemas:
     
    1. El display de alarmas no siempre se activa cuando pulso el boton de mostrar las alarmas.
    2. el bit de activación con el disparo de la alarma se activa la primera vez, como tengo solamente la opción de reconocer y no de resetear, al momento de desactivarse desaparece, y cuando se vuelvo a activar la alarma el bit de disparo no se activa.
     
    Alguien podria decirme que estoy haciendo mal?  soy  principiante
     
    gracias

    170 downloads

    Submitted

  15. Uni-Can Example

    Hi to all Unitronics users
    Examples for UniCan with 3 RC EX-1 modules  and DI in  DI out  and AN in and AN out
     

    166 downloads

    Updated

  16. CanOpen EXAMPLE

    Hi
    Slightly modified Example for CanOpen protocol for V560
    on-line change of parameters & check IN and OUT
    send and save parameters in NODE
    and set parameters when NODE loses communication and the outputs remain active
    I have not been able to find any help for this problem anywhere and but to make it easier for someone
     
    Best regards  

    100 downloads

    Updated

Sign in to follow this  

×
×
  • Create New...