This tool downloads compressed control applications to local or remote Unitronics controllers. You generate a compressed application from within either U90 Ladder or VisiLogic. Your end user will be able to download the application, but will not be able to view or modify it. The tool can download applications and OS.
I have a V350 with a very similar problem. The clock is resetting to 1/1/2006 on power up even when the MI's are not being lost. This PLC did loose its program due to a power loss/surge even though the battery was fine. Then I reloaded it with a new program and it is fine except for the clock resting issue.
Before I wrote my comment I re-created his routine with just one socket and tried everything I could to get the MODBUS configuration to let go without a PLC reset. Nothing worked. I was very surprised. I also took a look at the System Integers that denote socket configuration, but they are all read-only. I'm thinking Unitronics needs to address this if possible.
I'm looking for code examples to use on the UIS-WCB1_1 high speed counter. I have only found the wiring documentation for the module. And to confirm is the reset edge triggered or reset on True
And there a total lack of input specifications. trial and error has me using Inp 1 for counter 1 and Inp 4 for counter 2
The info may be out there but its not jumping out at me