This tool downloads compressed control applications to local or remote Unitronics controllers. You generate a compressed application from within either U90 Ladder or VisiLogic. Your end user will be able to download the application, but will not be able to view or modify it. The tool can download applications and OS.
That is a different issue, the details on the screen are different. In your case Fernanda, the PLC has lost it's Visilogic project. The most likely reason is that the on-board battery is flat (check the value of SB8) and the project was not originally downloaded with either the "download all and burn" or "Burn upload project" options.
Hola a todos
Tengo un problema con el PLC unitronics V350-35- TR34, se encuentra en modo stop. Alguien me podría ayudar
i have a similar problem with my PLC V350, ¿coul you help me? please.
Again, which part of "Check for Updates" did you click? To me this is very relevant info needed if there is a bug in there somewhere.
All my comments above about using Revo are steps I have found necessary to completely get rid of old install info.
This is not necessarily a Unitronics issue, M$oft are constantly changing the O/S on which it runs, which is often making life exceptionally difficult.