I'm trying to understand the behavior of the I/O bus of a USP-156-B10. I connected all my modules to the PLC with Local Expansion Kits (UAG-XKP), with a RJ-45 cable, and wanted to know what was the communication protocol (or fieldbus) inside this cable. Is it Ethernet ?
Thanks in advance,
thanks for support. I tried everything and finally helped... actualization of the software.
I downloaded the the latest version of Visilogic 9.8.79 and updated the PLC OS, now it works.
IO-AI1X-AO3X is not a valid I/O Module.
What I/O Modules are attached to the unit? or Snap On Module
What is the OS in the V290 ( and how old is it) and what version VisiLogic are you using?
OS -- Touch Screen for 5-8 seconds, to get into Info Mode, enter 1111 and then go to system( up/down arrows)
Please find attached some images with the problema that occurs at the time of oppening a Project in VisiLogic versión 9.8.65. The first error that appears is the "Load 12Type mismatch" and when you click to the "Ok" button and try to open another display it appears the second message "Run-time error '13': Type mismatch".
I have read a post where the response was to put a DLL in the VisiLogic folder. I have tryed this solution but it does not work (post was from 2015 and other VisiLogic versión).
Let me know if you have some solution!