Jump to content

Recommended Posts

Aloha all,

 

I recently acquired the following and have connected them in the following order:

Model V120-22-UN2, HW Rev A, OS Version 4.00(18), Vision FONTS - V1.3 (B00)

 

0 - EX-A2X expansion adapter

1 - IO-AI8   8 analog inputs

2 - IO-ATC8 8 analog inputs / 8 thermocouple inputs

3 - IO-AO6X 6 analog outputs

4 - IO-RO8   8 relay outputs

5 - IO-TO16  16 transistor outputs

6 - IO-R08   8 relay outputs

 

When attempting to configure the HW / IO modules, the first module in the list IO-AI8 is no where in the list.  Why is this module omitted from the list?

The plc connects and communicates just can't get the HW configured as I need to.  Any help is appreciated.

Link to comment
Share on other sites

Thanks for the info.  I looked at my configuration window at the module list and found that my version does not list the IO-AI8 as shown in your graphic  (IO-ATC8 / IO-AI8), it only shows IO-ATC8.  I've assigned slot 0 IO-ATC8 it appears to accept it. I believe that I downloaded the latest firmware for my PLC.  Should I be looking for more updates to, match what you see?

 

 

post-26013-0-26393500-1412189596_thumb.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...