sunit Posted August 9, 2015 Report Share Posted August 9, 2015 Hi I replaced the CNC controller for WIDIA single spindle gun drilling machine with our vision 430-TR34 and used the PTO function for positioning of the drill deapth. Earlier it was done with a CNC controller which failed. The customer was having no replacement for it from the OEM because the a machine was old. So then i adviced my clinet to change the full controls of the machine with new PLC the vision 430-TR34 and used the PTO function for position controll. Please see the link below for the photos of the project https://www.facebook.com/shriramauto 1 Quote Link to comment Share on other sites More sharing options...
Henny Posted August 11, 2015 Report Share Posted August 11, 2015 Hello Sunit You did a good job! It suprices me every time what a unitronics controller can do compared to Siemens,Schneider en Control logics and far more cheeper. Kind regards from the Netherlands. Henny Quote Link to comment Share on other sites More sharing options...
sunit Posted October 22, 2015 Author Report Share Posted October 22, 2015 Hello Sunit You did a good job! It suprices me every time what a unitronics controller can do compared to Siemens,Schneider en Control logics and far more cheeper. Kind regards from the Netherlands. Henny Thank you sir Quote Link to comment Share on other sites More sharing options...
Cara Bereck Levy Posted November 12, 2015 Report Share Posted November 12, 2015 Hi Sunit--would you like to do an application story for publication?Looks like a very cool project! Quote Link to comment Share on other sites More sharing options...
sunit Posted November 17, 2015 Author Report Share Posted November 17, 2015 Hi Sunit--would you like to do an application story for publication? Looks like a very cool project! Sure why not , what all detail do you want in it Quote Link to comment Share on other sites More sharing options...
MVP 2014 Simon Posted December 7, 2015 MVP 2014 Report Share Posted December 7, 2015 Great example of breaking into the traditional territory of the "big players". I would love to see this application story once it is published. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.