sagi.amoyal Posted November 22, 2015 Report Share Posted November 22, 2015 Hi all, I need help with the V200-19-ET2 communication moudle, I'm working with V230 controller, i installed the communication moudle at the PLC, I want to connect the plc to my PC with a communication cable, Which adjustments or special settings i need to do? Do i need a special program/software to do so? Thanks, Sagi Quote Link to comment Share on other sites More sharing options...
s.pratt Posted November 23, 2015 Report Share Posted November 23, 2015 Hello Sagi, What is the IP address of the PLC? What is the IP address of your PC? How are you trying to establish communications (i.e. though the communications & OS window in VisiLogic)? When you load a program into the V230, you should include the accoridng ladder to initialize the ethernet card. Please watch the following tutorial video: http://www.unitronics.com/support/webinars/ethernet-communication Quote Link to comment Share on other sites More sharing options...
sagi.amoyal Posted November 29, 2015 Author Report Share Posted November 29, 2015 Hi, now i have another problam, the PLC is not recognize the ethernet card, (SB 141) what could cause this problam? thanks!! Quote Link to comment Share on other sites More sharing options...
s.pratt Posted November 30, 2015 Report Share Posted November 30, 2015 Hello, Please contact your distributor or e-mail this issue into support@unitronics.com for further troubleshooting. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.