DM01

The jump settings are not filled in for switching per line. The setting I've made is the jump to an other page. That's the weird part of this all.

Hello, I have the V130 vision plc/hmi unit and had some problems with my settings screens (2 screens). One screens scrolls with the arrow (left/right) buttons from up to down, but the other copied from the first screen, scrolls with the arrows (left/right) like this: 4 Push arrow right --> 5 2 Push arrow right --> 3 3 Push arrow right --> 4 1 Push arrow right --> 2 5 Push arrow right --> 1 How can I program the arrows (left/right) to scroll: 1 Push arrow right --> 2 2 Push arrow right --> 3 3 Push arrow right --> 4 4 Push arrow right --> 5 5 Push arrow right --> 1 Who could help me?

hello, i'd like to send rs232 commands with the add-on module MJ20-RS on my jz20-t18. Which function blocks do i need to program for communications with other devices via rs232? greetz,

Hello, I'd like to have rs232 communication with a jazz Jz20-T18 and the add-on module MJ20-rs Is this possible? If so is there a example program? Which blocks can i use for the data sending and reading? Regards DM01

Hello, I'd like to have a formula math function with a logaritmic scale. The formula is P=10^(U-5,5) U is a analog input 0-10Vdc P is a pressure calculated by the Jazz PLC My question how to program this formula in the U90 Software? Greetz