Jump to content

viscoelastic

Members
  • Content Count

    95
  • Joined

  • Last visited

  • Days Won

    3

viscoelastic last won the day on April 13 2018

viscoelastic had the most liked content!

Community Reputation

6 Neutral

1 Follower

About viscoelastic

  • Rank
    Advanced Member

Profile Information

  • Gender
    Male
  • Interests
    Try cow painting, it's easier than trying to tip one.

Recent Profile Visitors

1,841 profile views
  1. I find myself saying "whatever, yes the TV screen, now tell me what is says" 😂 Not worth correcting people.
  2. if you are running your wire in cable trays as we usually do here at work, then make sure your tray has a metal separator between sensor wires and motor wires. We have went as far as to pull our sensor wires through flexible metal conduit and lay that in the tray. That step alone solves 90% of our phantom current issues.
  3. So if your getting 200 mm out of 1000 counts then each count is 5mm. So to get 350mm your target is 1750 counts. Just divide the output by 5 to get your mm.
  4. I have had similar issues. It only occurred when I was saving to a mapped drive. If I saved it local it was fine. Yes, I am running as admin but something does not care whether I am admin or not, especially if the file was created on another computer, by another user, with different permissions.
  5. @Ausman and @Flex727 I am ordering one, I write a review in this post after I get it.
  6. Check this out, here is an interesting device. A bit pricey, but intriguing to play sound on command. http://www.lt-automation.com/VoiceModule.htm
  7. @Ausman Thank you so much for the detailed response. I am going to look at a device and you statedes in the first. The ease will make it worth the money.
  8. It would really be a nice feature to have recorded annunciations. If it takes 6 hours to fill a tank, a loudspeaker saying Tank Is Full, or Warning Too Hot or the like. An alarm beeper does not tell anything about the condition.
  9. Is a way to have a speaker on the PLC to play *.wav files?
  10. For that short of a dwell time; I would use a high speed input. Even if the standard input could read it, you may have missed counts because it relies on checking each scan of the program. High speed inputs are independent of the scan. You see opposed of using a high speed input. May I ask why?
  11. I also believe it will work. One router will have to be able to be changed from router to bridge mode. I would also use static ip’s on everything.
  12. Seriously, Try what Joe said. I was taught that by someone else. It can save you hours of pulling out your hair.
×
×
  • Create New...