Jump to content

BoBs

Members
  • Posts

    2
  • Joined

  • Last visited

BoBs's Achievements

Newbie

Newbie (1/4)

0

Reputation

  1. Thanks Phil, I upgraded my Visilogic (was 8.0.1) to 8.6.1 which forced me to upgrade the PLC O/S. I only upgraded the O/S on the "listener" so far, but that was enough for my simple bit banger program to work across the net. I expect once I upgrade the O/S on all the PLCs and load the "real" application software it will work again. Thanks again, BoB
  2. Hello, I am having problems with a system that uses CANbus ISC. The system has 12 V570 PLCs and used to work correctly. Earlier this year (while the system was unused for a couple of months) we upgraded the OS in all the PLCs, but did not fully test the system after the upgrade. I'm not sure if that's related to our problem, but it's the only thing I'm aware of that changed. Now I am tasked with getting things working again. Everything works except the Network System Bits. The CANbus hardware and communication seems okay. When I remote into one of the PLCs via Ethernet (using it as a bridge) I can download applications or use remote access on any other PLC via the CANbus. That much works fine. I have taken all the PLCs off the CANbus except two, and written two very simple applications (attached) that should toggle a system bit on one PLC (#6), and read that system bit on the second PLC (#12). These simple applications do not work either. I'm baffled. Any ideas? Thanks, BoB simpleNSBlisten.vlp simpleNSBmake.vlp
×
×
  • Create New...