I'm looking to get a v120-22-r1 and I need to use an analog input to hook up a 0-5 psi pressure transducer. What I'm doing is making a plastic bottle leak detector. Using compressed air, I'll fill the bottle and the pressure transducer will see if there are any leaks or not. I'm pretty new to this PLC stuff and really have no clue here. Anyone have any suggestions on what type of transducer to use for this application? Do I need anything else to make this work properly, as far as the analog input goes? I was looking at a honeywell transducer at this webpage. Would something like this work for my application? Or do I need to go a different route?
http://www.alliedelec.com/search/productdetail.aspx?SKU=70120546&mkwid=s7QconsaU&pcrid=23475462857&pkw=honeywell%20asdx005g24r&pmt=b&pdv=c&gclid=COT76-vssrkCFY9AMgod6EsAhQ
We had someone make a leak detector like this using a different plc program and all we know is that they used the above transducer and a couple small capacitors were tied in with the 5 VDC that powers the transducer.
Thanks in advance.
