capitan_cook

Many thanks for your response. As the existing Samba SM43 is already equipped with an Ethernet card to control the existing external I / O's, the Samba can not be equipped with an RS-232 card. This means that the barcodescanner should also run on Ethernet TCP / IP based to be able to be integrated. Since the scanners are very expensive are about 5,200 € (Sick CLV690-000), I wanted to know once if someone has experience with it before I buy such a scanner. Now I think that I will tread the more inexpensive way. I will replace the SPS with a VISION 570 and then use a barcode scanner with RS 232. However, I have to convert the entire existing program of the SM43.

I am to connect a Samba SM43, which is equipped with Ethernet module V100-17-ET2, a barcode scanner and process the scanned data. Does anyone have a tip for me as I can realize this? Ich soll an einer Samba SM43, die mit Ethernet Modul V100-17-ET2 ausgestattet ist, einen Barcodescanner anschließen und die eingescannten Daten verarbeiten. Hat da jemand einen Tipp für mich wie ich das realisieren kann?

Hello, Thank you for your quick response. I have found my mistake. Modbus I have set correctly. I am trying to control with the Mobus an inverter. This accepts the command only when a number of bytes currently being used as bytes consist of a MSB and LSB. So I SI143 set to 10. Now the inverter is running. Greeting Cook

Hello, I want to write two coils with the coils Force Command 603 Unfortunately, I can not. I'm probably not the right structure. I would like to describe ID 2, coil number 0001h and 0002h with MB1 and MB2. I have selected the following structure can you tell me what is wrong? Greeting Cook Please forgive my poor English.