HughJooters

Just wanted to update and close the thread. Mike form Unitronics support was a great help in diagnosing an issue with the FIND ROW EXTENDED cmd. Support much appreciated. MS

Sent. Thanks for the advice. MS

Having an issue with a READ DATA. Find row chokes and spits out a -1 when is gets to line 762 of the data table. Suggestions on how I can post either screen shots or complete vlp? My upload limit is 237 KB which prohibits either. Prog zipped is just over 500 KB. Any help much appreciated. MS

Thanks all for the responses. As expected it was something simple, i only needed to do a hard power cycle on the PLC. Help much appreciated. H

Im sure this is an easy one, but my first time using unitronics so here goes. I have a v1040 and i purchased the add on ethernet card. Card is installed and appears to be happy looking at the status bits. My program works fine, i only wanted the ethernet card to be able to remote download updates to my data table. I am unable to ping the PLC. Both my PLC and the card are set for same subnet. PLC - 10.1.6.2 - 255.255.255.0 - 10.1.6.254 PC - 10.1.6.54 - 255.255.255.0 - 10.1.6.254 I think im screwed up in the cards socket init settings, but i havent been able to locate a decent how to on how to set up. Im attaching a couple pics here. Thanks for any assistance.