Mabrill

Hi We use a V130-33-TR34 to controll a special bag machine. But sometimes the PLC Don´t start the PTO in one cicle. The external input is fine and the PLC see the input but sometimes don´t start the PTO. Someone have an idea? Regards Mauricio Abril

Hi Emil I have used the tips that you tell me but the problem is the same i see a delay of 20ms. I have used the HSC interrupt and the immediate write to physical output but yet we have a delay so big. I use a V130-33-TR34. How we can improve this?

Hi I have use the Demo program Acc and dec to controll a servomotor with a repeteability of 0.5. And much less time to acceleration that the DEMO program (). I can not see any change in the value of the frecuency in the screen. I have a V130-33-TR34. Anybody can help me?

Hi i have a problem with a PID for temperature. The control have an error of 3 C and more: an the answer is to slow. we use a ramp but the controller do not follow it. The cv is to small and the system begin to cooling. We have been used many autotunning with a PID server but the problem is the same. How i can solve this issue?

We have a problem with a PTO we use this to control a servomotor, in a bag maker machine, but when we use a sensor to stop it the PTO this take a little time to stop, then the machine stop few centimeters after the signal has been received. And when we increment the frecuency (speed) the distance of stop becomes higher. Somebody have any solution?

Hi everybody We have a problem with a PTO we use this to control a servomotor, in a bag maker machine, but when we use a sensor to stop it the PTO this take a little time to stop, then the machine stop few centimeters after the signal has been received. And when we increment the frecuency (speed) the distance of stop becomes higher. Somebody have any solution?