Maulik
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by Maulik
-
-
-
Yes, A & B are driven by a common hydraulic pump ( by vfd )
C and D are fixed.
Cloth is unwinded from Roller A to Roller B.
We have to maintain metres / minute speed of unwinding Roller. We will measure speed using proxy connected on Roller C.
Depending upon this speed we have to vary speed of hydraulic pump.
Rgds,
Maulik
-
Dear Sir,
I want to configure Proximity Switch 1 as Input 0 as high speed counter to count rotations of Roller 1.
Proximity Switch 2 as Input 1 as high speed counter to count rotations of Roller 2.
Proximity Switch 2 as Input 2 to measure frequency of Roller 3.
Please Help me whether this is possible with E3xB or not ?
When I configure input I0 as HSC 0 in Hardware Configuration, i cannot configure input I1 as high Speed Counter 1. I can only configure input I1 as frequency measurement counter for Input I0.
Please help .
Rgds,
Maulik
-
Thank u sir
rgds,
maulik
-
Hello to All.
I am new to Unitronics PLC Programming.
I am using V570 and V200-18-E3xB.
I have 3 Proximity Switches. I need to use 2 of them as high speed counters and 1 proximity switch for Frequency Measurement.
I will use Input I0 as High Speed Counter 0 with Proximity Switch 1
Input I1 for Frequency Measurement with Proximity Switch 2
and
Input I2 as High Speed Counter 2
Please help me whether above requirement is possible with E3xB snap in or not ??
Thanks And Best Regards,
Maulik
-
Dear Sir,
I am getting an error in visilogic, while compiling.
PLC is V570.Error no 55, DLU exceeds size limit, unable to understand the reason for his error.
Please help me with this.
Regards,
Maulik
-
thank you sir.
rgds,
maulik
-
I had made a project with Vision 280 for an extruder oem.
Now I want to upgrade my hardware to Vision 570.
How to convert a project from V280 to V570.
Pls help,
Rgds,
Maulik
-
thanks.
problem solved,
rgds,
maulik
-
I have installed visilogic 9.5.
When i open the software, i m getting error 9 permission denied.
pls help.
rgds,
maulik
-
I have been using jazz plcs since last 3-4 years and have never encountered any problem.
However, in last two weeks, two of my jazz plcs have encountered the same problem at two different sites :-
1) the logic is working..
2) display yellow led is on,
but, my hmi screens wont show up...
please help...
best rgds,
maulik.
Run Time Error 2147024770 (8007007e) Automation Error
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Dear All,
Pls help.
Rgds,
Maulik