sandreou

Thank you for your reply. I will have that in mind in case i need the USB ports. For reference i managed to upgrade the unistream by connecting it to the pc via micro usb cable. And then with remote update and selecting external SD card.

I have a unistream 15" US-156-B10 and i managed to have both usb ports damaged when i was having a usb to serial converter to a printer. Now that i need to upgrade the panel to the new firmware i am not able to use the usb ports . What are my options? I tried the SD card but it cannot find the files to proceed with the update

"Do you mean that you used to use the same procedure with Visilogic on an earlier version of Windows? Like 7 or 8? If so, have you upgraded to a new PC that has W10 as supplied, or just upgraded your O/S to W10 on the same PC? Or are you trying Visilogic for the first time after doing similar things with other devices?" This is the first time i installed it on a new pc with windows 10. Also is the first experience of visiologic with windows10 "If you are essentially working on a new install of Visilogic, did you install using right click run as admin, and also ensured the visilogic.exe is set to run as administrator as well?" I run it as administraotr but during installation i did not install it as administrator but i didnt get any error These questions are very relevant to further suggestions. "As for SB168 mentioned by Alex, you are activating it incorrectly. You do not do the coil after the card init like you have shown, so remove it. In Visilogic go to the operand list at the bottom and in System Bits scroll to SB168. The "Power Plug" at the top of one of the columns is whether the bit is turned on or off at power up. If you click the relevant box of the table, you'll get a selector dropdown appear. Choose SET, which will then show as a 1. After doing a compile/ save, if you then search for SB168 by doing a right click anywhere in the relevant operand row, and then select "Find SB168", the program will show that it doesn't appear. It doesn't need to be anywhere, as the system knows it is on via the power-up setting." Because i cannot connect remotely i have to change that locally and i need to schedule a visit because is far away from me the PLC.But I guess this has nothing to do with the problem because this is the same configuration i used on ll of other applications i did without any problem

So AlexUT based on the pictures i sent sockets are correct Also its a new pc windows 10 and i run the applications as administrator. I dont understand what is wrong

Thank you for your replies please see attached the configurations of the sockets When i change socket 1 to TCP/Client and then i press ESC >ESC>ESC to go back to the user software and i enter back info mode is again set to TCP/Server I guess TCP Slave= TCP/Client Also where i set Protocol Type: Pcom Please advice

thanks for your support please be more specific how i get into INFO mode?

Thank you for your feedback Yes is over intranet and the pc is on the same subnet , with IP 192.168.10.206 and as i told in my previous post i can ping the 192.168.10.150 from the pc

I am trying to connect to a V280 over ethernet but i get TCP fail window from the pc (windows 10) i can ping the ip that i configured in V280. If i disconect the V280 i cannot ping it so i guess the ethernet cable to the plc and my configuarion is ok. I get the same message either with Visilogic or Remote operator This is the first time i experience this problem and this procedure is the same i follow for many years. Is the first time i try it on win10 Please advice

I have the April15 help file and i try to update and i get a message that i have the latest version. Where i can find the June 5 help file?

I can't find anything in help files related to alarms. which help files are you talking about? I have few questions: 1.Are there any system bits associated with alarms? For example a bit that is triggered every time there is new alarm? 2. About the ACK bits they set automatically when you acknowledge an alarm, do you have to reset them manually after you clear the alarm?

Since the last update alarms are now supported, thank you Unitronics! Unfortunately there is no help file or example provided to help us take full benefit of the new feature. What I need to know if there is a way to link the active alarms with a bit so i can play an external sound overtime there is an active alarm. Also I need to know how its possible to if all alarms have been ACK but not clear to have another bit linked to this status. My end goal is to have an external LED BUZZER to make sound each time there is an active alarm until I ACK it but its LED to remain on until I CLR all alarms. Is this possible with the new alarms feature or do i have to use events?

At last! NEW RELEASE UNILOGIC 1.14.33 UNISTREAM OS 1.14.7 JUNE, 2015 This major release brings you a brand-new power feature: built-in Alarms. any example?

Well 1.5seconds delay make it useless for applications like sound for button click. I think that audible buttons are very important for HMI experience and is sad that such a new product can't offer this option to the programmer!

Thank you! I didn't know that

I don't know what was wrong! I deleted the store block and added it again and now it displays all the variables inside the PIDCOnfig struct! Thank you! Just another question on this if you can help me. I have the load input 0-30A (0-10V) on the UAN0402N 12-bit (0-8191)input port. I linearise it 0-8191(0-10v) to 0-3000 and store it in the process value and the control value will have limits 0-16383 and directly stored on the UAN-0402N 14bit (0-16383) output port. Is this a correct approach for PID control

But the store function accept only INT16 variables. It does not allow me to add any INT32. How to i use a store block with INT32 variables?

No. I just have a button on screen that it has an action to load a new screen and the same time has a second action to set a coil. That coil is used in project actions to trigger "play sound". Once i press the button the new screen appears immediately but the click sound lags the actual click for about 1.5secs Did you try it and you get a sound output as soon as you press the button?

Hi, I have the same problem with Unilogic. I am working with PID and i want to store the Control Value which is INT32 into the analog output of UAN0402N which is INT16. How should i do this?

Thank you I did what you suggested but the sound lags 1-1.5sec of the button click action! I am doing something wrong or the processing speed is relative slow for such a task?

Hi, I would like to know how can I add a "click" sound during a button press in UniStream. Thanks, S.Andreou

I hope I can get an answer as soon as possible I ve been using VisiLogic since 2006 with Windows XP. I was able to update the OS firmware of all of my Vision280 PLCs without any problems. I was using either the onboard serial com of my desktop PC or the usb to serial adaptor of my laptop. Since my upgrade to windows 7 I am not able to perform an update of the OS firmware. I can only download the source code on the Vision280 PLC. I was wondering if it has something to do with the default com port settings of Windows 7.

Hi I have new Dell Desktop PC with windows 7 professional 64bit and visiLogic 8.6.3. I am able to use the onboard serial port to download my programs to the Vision280 BUT when i try to update the OS of the Vision280 the communication fails. I try the same think on my laptop with usb to serial adaptor that i recently installed windows 7 professional with visiLogic 8.6.1 and i have the same problem. Please advise