Jump to content

AZ1975

Members
  • Posts

    11
  • Joined

  • Last visited

Everything posted by AZ1975

  1. As I promised I attached two examples and some explanations. Enjoy it AZ1975 VisiLogic Project EMAIL1.pdf VisiLogic Project EMAIL2.pdf THE ULTIMATE EMAIL BIBLE.pdf
  2. Hi to all, i was a few days off the office, i'll send you a pdf printing of the program
  3. Hi, I was trying to SMS over Ethernet, the question is how the PLC browse to a dedicated http web server. I have a V570 with Eth card communicating with HMI, and PC. Thanks, AZ
  4. Muy bueno el proyecto, excelente grafica. Felicitaciones. Podrias ayudarme o enseniarme como mandas mensajes SMS que modem utilizas y algun ejemplo? Muchas gracias. AZ
  5. HOW DO I IMPORT HMI DISPLAY FROM V1210 TO V570 WITHOUT GETTING THE RUNTIME ERROR AND CRASHING? (VISILOGIC 9.3.1) THANKS
  6. MyProj.pdfJust returned from South America, where the project take place, about the process: After the extracting the juice from the citrus they take the peels, chop them, make a mash, filter, and concentrate the liquids.(of course is more complicate than that...) The PLC: V1210 with Ethernet Card to control the process and programming remotly. About 150 I/O's, analog inputs to control temps, levels, VSD's. analog outputs for VSD's too. All objects in the process are programmed logicaly as FunctionBolcks, practically each object is a soubroutine.(objects are: motors,valves,analog signal,level switch,etc). Enjoy it. AZ1975
  7. I would like to be able to write code and wrap it as a FUNCTION BLOCK or CONTROL MODULE and call it severall times with different names just like other PLC's do, to that FB connect a FACEPLATE at the panel and so. I wish...
  8. Thank you all for your tips. For sure the I/O will be placed inside an existing board. What about the PLC/PANEL ? I would like to place it "cut-out" at the same board as I/O. What do you think? thanks
  9. Hello, What PLC do you recommend for a Dairy Farm, about 200 I/O, few analogs, and maybe external HMI . Thanks, AZ1975
×
×
  • Create New...