Jump to content

Capa_Anthony

Members
  • Posts

    3
  • Joined

  • Last visited

Everything posted by Capa_Anthony

  1. Hi, I configured the PLC as an Ethernet/IP adapter but I don't understand how to link tag to input/output when I configure the PLC as an adapter for Ethernet/IP. for exemple, my input_0 on the UID-W1616T (alis: Start_Process), how can I link it to the input tag created in adaptater node. If someone have a program explemple, it's can help me I have watch the tuto on Youtube but this parts is not explain. PS: It's the first time I use Ethernet/IP on a PLC. Thank.
  2. Hi Ofir, Thanks for the answer, you understand my project and my question is perhaps a bit stupid but I do not know how to link the tag to inputs and outputs, we have to configure it in a menu or with a ladder program. Thank you for your help.
  3. Dear All, I'm looking for program example to try to use Ethernet/IP and specialy with implicit message. I need to communicate in Ethernet/IP with another PLC (Siemens, Omron..) with my Unilogic PLC. My PLC will be the slave and another PLC the master. The master will send trame that only must change the I/O, there is no another data. I have configure it to adapter but after that I don't know how I can lies trame to Input/Ouput of my PLC . It's the first time I use Ethernet/IP so I need some documentation or example. I use EtherNet/IP Tools from Molex to simulate the master. Thank for your help. Anthony
×
×
  • Create New...