Rog
Members-
Posts
36 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Everything posted by Rog
-
This working, it connecting to sensor. Also the sensor wire A and B hook up to probe was backwards. But the unistream manual says D+ = B and D- = A. Switched this and it connected.
-
It just a blank program . Just trying to a reading through being online, looking at global tags. Thanks for the help. test1.ulpr
-
Tried that as well. Tried this as well. Do I need to create some ladder logic to make connect and read?
-
Still not having luck. My usb rs485 finds the device. But unistream is still not making the connection. Kinda lost at this point.
-
Yeah still not having any luck with this. I am thinking I am trouble understanding the address location of my device.
-
-
New to using RS485 modbus. I am wanting to set up a new pH sensor using modbus. Not sure where to begin with this. I know i set-up unistream hmi as master. I want to read pH and then calibrate the sensor. I have attached the paper work from sensor. Can't make heads or tails out of it. A simple program would make difference to understand what going on with the addresses and such. Thanks for the help!
-
I tried running as admin. Nothing. I did get it working. I had them on a separate partition. I guess unistream doesn't like. So I put them all on c drive. Works fine now. I have all older version.
-
I recently got a new laptop with Windows 11. So I installed Unistream 1.28.26 worked fine. Did installed every version up to latest. All opening fine on install. Keeping the older version as well. Before anything said. I have applications out there that are built on older version. Due to how long it takes to do downloads and updates on slow 4g internet can be. I have to keep using older version. Older version don't open. The splash screen starts then says loading components, Then just disappears. Running old version on old laptop worked fine.
-
Was wondering if there is remote i/o outputs with 4 to 20 mA output. The URA-0004W and URA-0008W only shows 0 to 20 mA. Thanks Rog
-
So we have several of the unistream units out there. But recently the last 2 we built with the exact program on them. Are having issues with analog inputs. They started to jump all over the place. Tried different signal wires same reading. Multi meter run series and analog signal not jumping all over the place, just smooth reading. I don't know if it the modules or the last firmware update. Was wondering if you guys had any thoughts. Thanks Rog
-
We been having issues this modules. Work for sometime. Then all sudden the module fails. Reading from the input starts to jump all over the place. It turns out one the inputs causes it. Removed the input. We have this set up to read from the source. Is there something causing this fail. We have replaced bunch of the AI8. Never have issues with AI4 modules. Thanks
-
It would good to see in this set-up. You set your triggers and then it linked to a bit. That is could be used to a Digital output for physical alarm. When they acknowledge it. Then reset timers for alarm. To go off again till it resolved. Just suggestion. Save whole a lot of time in ladder logic.
-
Been having issues with this past couple days. Wondering if anyone else had it or found a fix for it. This 2 displays either appear behind the main application, and i can't get to them. Then I am locked out from getting to them. Then I have to control-alt-delete and then task manager and close it. Then reopen and the move application around to right spot to get to them. If not then I have to do it over till I can. Thanks Rog
-
I was wondering what most people use for MQTT brokers servers. Which is the best for data analytics and collection? Thanks, Rog
-
Thanks for the heads up.
-
Trying to connect to a Azure sql server running the latest version of SQL server. I can connect using telnet and SSMS no problems. The unistream can connect to a local host using sql express. However when i connect using the same info. I get error which is the pic attached. I am kinda at a impasse. So what server on the unistream line compatible with?
-
-
I am trying to make a running totalizer in unistream. Trying to figure what best way to that. I am kinda new at the unistream line, but it has been pleasant experience. I attached what I had. Any advice on how should go about this. Trying to calculate GPS on flow. Thanks
-
Thanks for the input, that helped to give me little more insight. As for the seminars. There only one been lasted at the end Feb. Is there going to be more? Thanks
-
Hello Gents and Ladies, I am new to the unistream line. Haven't had chance to take the seminar for it. It definitely little bit different then Visilogic line as for programming. Just trying to figure the math out. Some of it turning out to be zero. Just can't figure out what I am doing wrong. If you care for some points. Would like to see math examples. Thanks PICC1.ulpr
-
V 350 High speed counter
Rog replied to Rog's topic in Vision & Samba PLC + HMI Controllers & VisiLogic Software
As in flow meter? It is the SPX model. -
Hi all, I have V350-35-R6. Trying to set-up high speed counter on using seamtrics s-series jet flow meter. https://www.seametrics.com/wp-content/uploads/LT-65200067r1.4-20180202-S-Series-Instr_0.pdf. I have tried pnp and npn neither work. I can get it to run on the DI8 modules(using PnP and resistor) and the snap-in modules using NpN on it using the same logic. I just curious if there anything wrong with what i doing wrong.