Jump to content

NOVI

Members
  • Posts

    10
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by NOVI

  1. RS-485 & Enc inverter View File Hello A simple application for connecting a Unitronics PLC V280 &Chinese inverter modell EDS V-300 Submitter NOVI Submitted 06/20/2020 Category From Users: VisiLogic applications
  2. Version 1.0.0

    188 downloads

    Hello A simple application for connecting a Unitronics PLC V280 &Chinese inverter modell EDS V-300
  3. CanOpen EXAMPLE View File Hi Slightly modified Example for CanOpen protocol when NODE loses communication and the outputs remain active I have not been able to find any help for this problem anywhere and but to make it easier for someone Perhaps it is not perfectly executed but it will smoll help. If somebody has a better solution, I'd like to send it to me Best regards Submitter NOVI Submitted 05/02/2018 Category From Users: VisiLogic applications
  4. CanBus Example View File Hi to all Unitronics users Examples for CanBus with 3 RC EX-1 modules and DI in DI out and AN in and AN out Submitter NOVI Submitted 05/02/2018 Category From Users: VisiLogic applications
  5. Here I am returning your corrected application for PLC , You made a mistake that you wanted to send the output directly in RC it is possible to send DO as MB only V570_CANMasterforEX-RC1 (1).vlp
  6. Version 1.0.0

    426 downloads

    Hi to all Unitronics users Examples for UniCan with 3 RC EX-1 modules and DI in DI out and AN in and AN out
  7. Version 1.0.1

    374 downloads

    Hi Slightly modified Example for CanOpen protocol for V560 on-line change of parameters & check IN and OUT send and save parameters in NODE and set parameters when NODE loses communication and the outputs remain active I have not been able to find any help for this problem anywhere and but to make it easier for someone Best regards
  8. Greg Hi I send you my files for PLC & EX-RC1 , First make adress in your extenzion devices and separatly programming each. After that look the programm and make yours aplication programm and adjust for yours screen in V 560. Joe explained to you how to make address, but programming time for RC1 is the safest at 38,400 via RS232 Evrything next is very simple. Good luck RC TEST V1040.vlp RC#2.vlp RC#3.vlp RC#4.vlp
  9. Hi My friend and I have the same problem and I can not solve it. I made a small test application but I do not succeed, If you managed to solve the problem please let me know, how !!! I attach my small application for the MURR cube 20s , but I believe that all devices do the same. And please tell me if I have any omissions CanOpen.vlp
  10. Yes it's possible. The thing is just in correct addressing, One PLC must be master and he must communicate with RC 1. Use the app I made for testing, in all three PLCs just give them their addresses correctly and determine who will communicate with RC 1 I do not have free three PLC-s to try
  11. EX-RC 1 Simply testing to help you and be do not waste valuable time All I checked on-line and measured D - IN & OUT, IN-mA, IN and OUT VOLTAGE and all functioning correctly. 2 X - IO-D16A3TO16 + IO-AO6X+IO-AI4-AO2 MASTER V 1040.vlp RC#2 ( SLAVE ).vlp RC#3 (slave ).vlp
  12. Sorry I'll see where the i have mistake, but I will correct
×
×
  • Create New...