I have a project with 2pcs of 0808THS, every Block1 is configured as PWM, 1 channel , with target.
when I set
PWM Frequency = 50000
PWM Duty cycle channel1 =500
PWM mode = 0
PWM Enable =1
my stepper moves but PWM Current Position is 0 all the time
if i set
PWM Frequency = 50000
PWM Duty cycle channel1 =500
PWM mode = 1
PWM Target = 100000
PWM Target Enable=1
my stepper moves , PWM Target reached is get 1 afeter some time , but again PWM Current Position is 0 all the time
so my problem is "PWM Current Position" - what i did wrong and why PWM Current Position is not count pulses?
Any ideas?
Thank you
Ognyan Obretenov