Jump to content

Antonio

Members
 View Profile  See their activity

  • Posts

    3

  • Joined

  • Last visited

 Content Type 

Everything posted by Antonio

  1. Antonio
    Thanks for the response. My signal quality is 21. I forwarded a port and successfully accessed it via telnet, but it still gives me the same error when i try to call from the PLC. Do you have any other suggestions?
  2. Antonio
    Hi, I try to make a call from the PLC using GPRS and modem Cinterion EHS6T. I successfully prepare the PLC-side modem but when I Start the Call from the PLC it constantly gives me Modem Timeout.
  3. Antonio
    Hi there, I try to initialize Enfora modem PC-side. I followed all of the steps from the tutorials on the Internet. I tried different Baudrates, tried Hyperterminal... When I use Baudrate of 9600, and the AT commands defined in the Modem Services, all of the commands are successfully completed and when it comes to the end it always says: Modem could not be initialized. Do you have any advice what can be the problem?
×
×
  • Create New...