Jump to content

Phil07

Members
  • Posts

    3
  • Joined

  • Last visited

Phil07's Achievements

Newbie

Newbie (1/4)

0

Reputation

  1. Do you happen to know if the Samba SM35 (which looks like the cousin of the V350) would require any additional software to perform the tests that I was referring to in my previous posts? Would I have to install UniLogic and use it to throw a program on the SM35..or can that all be handled via the preloaded HMI on the SM35? Also..are their any costs associated with UniLogic..I dont see anything regarding costs or licensing on the Unitronics site? Thanks again!
  2. Thank you for the reply Joe, much obliged. My initial plan was to utilize to the .NET Driver supplied by Unitronics to communicate with the V350. Since I don't have a physical V350 to test my code with, I was hoping an emulator/simulator existed somewhere that I could test my code against to make sure my reads/writes/connects performed as expected. I know there are .NET Modbus libraries out there that I could also use..in fact I have some existing code that uses the Modbus protocol I could perhaps leverage. So are you saying that so long as my code is able to perform reads and writes to the online modbus simulators you suggested, that I should be golden? Thanks again for your advice.
  3. Hello there, I am having a bear of a time finding if any emulator/simulator exists for Unitronics PLCs (specifically the V350), which would simulate protocol communications. I am developing an application that will be reading/writing to a V350, and was wondering if any software existed that would be able to simulate that communication?
×
×
  • Create New...