[How to use a multi-line text in HMI label?]

32 minutes ago, Saragani said:

Shift+Enter to start a new line.

Thank you!

[How to use a multi-line text in HMI label?]

Hello,
Is there a way to do multi-line text label in a button text? Maybe I'm missing something!

Thanks.

[Analog scaling/PID setpoint]

Thank you. I was under the impression that since this was on the Unitronics website, that it was heavily monitored by the company. I will call in with any urgent questions. Thanks again for your assistance.

[Analog scaling/PID setpoint]

On 6/3/2014 at 11:23 PM, Simon said:

This forum is turning out to be pretty useless.

 

[Timer preset using a variable]

This post answers one of my questions but how can I set limits so the HMI entry can only be from 5-30? Or am I better off doing a "data entry box" where I can have limits built in?

[Analog scaling/PID setpoint]

Hello,
Wondering if I can change the 0-8191 scaling in the analog input setup to whatever I need? 0-1000 for a 0-1000psi pressure sensor?

Can i use a numeric data entry block to directly load a PID setpoint into the PID.Setpoint data type?

Also- Is there a counter function in the logic or do you have to create your own?

 

Thank you!

[Basic HMI elements usage]

Thank you for the reply. A few more questions:

Is there a counter function? I am going to need to develop a run timer for a pump and was just going to increment a counter based on a timer.

 

Can I configure my analog scaling right in the properties window for the individual input?

 

Can i move a setpoint from the HMI screen directly into the PID setpoint?

 

 

[Basic HMI elements usage]

Hello all,
I'm working on my 1st UniLogic program. I have years experience with AB, Red Lion and some Siemens. This is a new beast to me. How can I do the following:

Make a circle?
Multistate image?
Group graphics?

This is going to be a learning curve!
Thanks for any replies.