Stefan

Hello together, i try to measure the Speed of Rotation (between 1000 1/min and 8000 1/min) with a Samba SM43-J-TA22 and an capacitiv sensor with one srew on the Motor shaft. When i use the High Speed Input in the Hardware Configuration (Frequency Measurment 1000msec) i have an very bad Resolution (Value 16 * 60 = 960 and next Value 17 *60 =1020). I've tried to use the "Freq<- HSC" building block, but it doens't work with my values. For example im not sure what i have to chose for the Channel A, because I can chose HSC 0, HSC1 and HSC2 there but I only have two HS channels on my Samba Controller. Is this the right way to measure the Speed of Roation more exactly? If yes can you give me an example how i have to config the block, and if i have to set up the High Speed Input in the Hardware Config? Thank you very much. Kind regards Stefan