Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

1 Neutral

About sasdiscos

  • Rank

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Also, does any one know a way to wake up a screen saver using the touched screen bit via VNC connection. I use the touched but to wake the screen and reload the last displayed page, can't do this via VNC as its not actually touching the screen. Cheers
  2. So Im now getting my head around unistream, many thanks flex727 for the point to the examples. I have successfully got comms between uni stream and vision and have got most of my control under way and working. Took a while to get used to the new layout and working but im getting there. Question.... How do i send a set time to vision? In the vision plc there is a time entry function that communicates to other vision over modbus. I can't seem to read and write a set time both ways. uni-vis/vis-uni. Temperature settings are fine as i just use a numeric input. Just need hours and mins, is there an input for this. Many thanks, Steve
  3. Hi all, ive been working with visilogic for a few years now and am reasonable with it. I am trying to learn UniStream. It is very different and im struggling to get my head round it, sometimes even the basics. As I don't do a lot of it I spend a few hours at it and then don't touch it for a while, I then forget what ive learned. Do yo chaps have any pointers for me please? Im starting with a USP 070 B08. Id like to use it as a master to talk to a slave v350 over modbus just using it as a remote screen hmi for now. There doesn't seem to be any examples like there was in visilogic which is a shame as they are very useful. Any help greatly appreciated. Steve
  4. Many thanks guys, yea I use the v700 a lot and like it. I've never seen a 1210 and was just curios. steve
  5. Hi all, Can any one tell me if the resolution of the 1210 is actually good enough to suit its size? What do the icons look like etc? Im thinking of getting one for my next project. Many thanks, Steve
  6. They used to to have a remote plc to plc comms block function, don't think it worked well so they removed it, shame they didn't get it working and keep it really. Steve
  7. I had a v350 that did the same, turns out it was faulty, sent me a new one. Never actually found out the problem. Steve
  8. Please can my programmes be removed from public view/download? Many thanks, Steve
  9. Joe, I can't believe I missed the fact that I had put 108 instead of 208. Grrrrrrrr! You are a top man, many many thanks for your help, It just shows a fresh pair of eyes can sometimes point out what is smacking you in the face! Its working spot on. I owe you a beer! Steve
  10. Hi guys and gals, I have 2 controllers running modbus working perfectly, i need to add another master but for the life of me can't get it working, I currently run the slave and 1st master on socket 3 port 502 over tcp/ip. I set up a second config rung and assigned it to port 503 on socket 2, have the scan ex on both sockets in the slave and just one on each of the masters. Cant get the second master to take to the slave over socket two. Its frustrating the hell out of me. Any one point me in the right direction??? Many thanks in advance, Steve
  11. Yes, I agree, its my router. or provider more likely. Sky. Steve
  • Create New...