EscanabaYooper
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by EscanabaYooper
-
-
Thank you very much sgull. Changing C to float took care of the error!
-
Thanks, but the drop down list for A allows a float to be selected along with any of 10 other types. With my limited experience in VisiLogic, I have noticed non-acceptable data types do not appear in the drop down lists. Is this a bug?
I have a function which results in a float, MF0. I am simply trying to convert it to a string to be displayed on the HMI.
-
V130 problem with Modbus TCP/IP Function Code #15
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Just offering my two cents....
I just finished a VS.net application that shares a common MODBUS between six devices. None of them seemed to precisely follow the MODBUS standard. After pulling my hair out for days, I decided to download a serial sniffer https://www.serialmon.com/ and run it while communicating with each device's native software. This allowed me to see the exact MODBUS bytes being shared. I simply copied the bytes into my application as needed. This eliminated the need for reading manuals and selecting the registers and offsets and calculating CRCs and so on just to find that the device "closely" followed the protocol.
Fortunately, my Samba has an ethernet port so it wasn't a part of the MODBUS problem.