Jump to content

kolya_asu

Members
  • Content Count

    6
  • Joined

  • Last visited

Community Reputation

0 Neutral

About kolya_asu

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Good day. Please look, here is taken from the instructions for Visilogic:
  2. Yes, I did everything as stated in the UniOPS instructions. I said that if I configure the OPS and the program in the PLC to work on Modbus TCP-IP, then everything works fine for me, but for some reason, the СОМ-port doesn’t want something !? Maybe there is a problem in the sequence of location of the FB blocks?
  3. Incompatible hardware configuration (slightly different) ... Yes, indeed, the PLC is different in the configuration. I have a model V350-35-TU24-IT. I just changed the configuration of harware to the nearest model V350-35-TA24, since it is *** TU24 that does not exist at all. Nothing has changed, the connection with the OPS is not installed. I do not think that the problem in the configuration of harware, according to the TSP IP works the same. What could be more? Changed a bit the initialization of COM1 and the inclusion of MODBUS EX. The result is the same - no connection is established with UniOPS.
  4. Hello. I am forced to ask you for help, as I spent a lot of time trying to solve this problem on my own. I just can’t connect PLC V350 Vision with OPS server UNIOPS + SCADA. By TSP IP I managed with great difficulty to establish a connection with this controller (nowhere did I find an intelligible, complete description of the connection), but now this is not about it. I tried various options, but nothing works. I enclose screenshots for clarity, can someone tell me what else I need to do in order for the VISION PLC 350 to see the OPS server. I would be grateful for any help. Thanks. . The original RS232 cable, 100% working!
  5. Good day. I have a similar problem like Maxim. Trying to tie SIMPLE SCADA + UNIOPC + VISION V350. Simpl Scada + UNIOPC - a connection has been established, and how to connect the VISION V350 controller with the UNIOPC - does not work. Can you please tell me what to do? I wanted to download the link http://ftp.unitronics.com/Downloads/OPC Client.exe - but it does not work. I would be grateful for your help.
×
×
  • Create New...