Arlindo Silva

We start load points at 40021 Now i load the 4000 - 4100 and doesn't work Type of points .: INTEGER Its possible the starter points stays wrong. I send in att PRTSCN about workbench

Thanxs a lot for answer. We make all of steps discribed by you and the communication with PLC stays good and stable. We load 40000+ points and 30000+ in the scada controller, and only see ***. If you have the adress list of GE Cimplicity Scada, its possible you send me ? its obrigatory make the currect data tables ?! Thanxs a lot your availability for help us.

Hello, I write from Portugal, sorry if my english don´t is the best. I have a problem, i have a GE Cimplicity Scada for automation control. Now, i buy a Unitronics HMI + PLC for automate a litle pumps and flow meters but have a problem, I have the plc connected to GPRS modem and comunicate to SCADA SERVER via VPN. The protocol is MODBUS comunication and the scada ping's PLC normaly, but dont comunicate between them correct. I load the 40000 + points and the scada read's NOTHING. I need a software or something else for convert the values come from PLC or have a specific "comunication rung" ? Appreciate all answers and helps. Thnxs a lot