Jump to content

FTSMDLZ

Members
  • Posts

    3
  • Joined

  • Last visited

Posts posted by FTSMDLZ

  1. I have a medium sized program that runs without problems on its own. I was requested to have a video play on the HMI as a sort of screensaver. I added this by using a default bit in UniLogic called "General.Touched Bit" that goes high when the screen is touched. I used this to reset a 1 minute timer (see picture 1), this way the timer would reset back to 1 minute countdown every time the screen was touched. When the timer runs out a bit i named "Run Video" goes high which i then use in "Actions" to load a screen named Video (see picture 2 and 3). This screen consists of 2 elements. The video element taking up the full screen size and an invisible button over it. The video settings can be seen in picture 4. The button is used just to load last screen.

    This when tested works just as requested except if the video has been running for a while the whole HMI freezes. The PLC functions remain and the other processes still work, but the HMI is unusable until a forced reset by power loss is done.

    My setup can be seen in picture 5 and my HMI is the Unistream 7" Modular.

    If anyone knows what causes the HMI freeze when playing video a reply is much appreciated. I have considered the HMI heating up being the problem, but doesn't seem to be the case.

    Picture1.JPG

    Picture2.JPG

    Picture3.JPG

    Picture4.JPG

    Picture5.JPG

×
×
  • Create New...