Jump to content

pat_newbie

Members
  • Posts

    7
  • Joined

pat_newbie's Achievements

Newbie

Newbie (1/4)

0

Reputation

  1. Hi all, I have resolved the issue and confirm there is nothing wrong with 0D+0A for ETX or clear buffer issue. Testing the read back using hyper terminal have no issue capturing the full text from the modem however with the controller some text was missing. I guess is an bug issue from the controller. Please see screen shot an "ackkk" i send back to the modem using my mobile and in return the controller reply back with text that come with my mobile number. Case resolved.
  2. Current program i'm adding the MB1149 to switch over to manual triggering. it was suppose to clear buffer once mb2403 turn on for the original program however joe mentioned that i might be clearing the buffer too fast upon receiving the text so i add this for the testing. So anyone can resolve my issue on the last text? ☹️
  3. The above program is done for step by step sending command to retrieve the text. i'm blocking it temporary so as to try the effect of clearing the buffer manually upon receiving the text so that i won't miss any of the text before clearing. mb347 is to perform manual reset.
  4. Hi again, So what should be the correct ETX for my case as this cannot be left blank. For my trying i have removed the OD from the ETX and change the receive command and reset buffer to be in manual trigger mode but i'm still not able to capture the last text. Appreciate if you can resolve my problem.
  5. I even tried with 2 lines index with 100 vector length each hoping to capture the text on the last line text but it was no good either.
  6. sorry is protocol scan in full. I'm using this protocol to rewrite a program for 4G modem so far everything is working however the last text is what i need to capture to compare whether this is a valid text send by user to perform acknowledgement. Please help thanks.
  7. how to read the last text using visilogic proscan seem my existing readout are not able to capture the next line which is the "Ack". As you can see in hyper terminal, the "Ack" capture on the next link however It seem the proscan auto line break after receiving up to 32". Can anyone help?
×
×
  • Create New...