Jump to content

apbt.drewyoung

Members
 View Profile  See their activity

  • Posts

    7

  • Joined

  • Last visited

 Content Type 

Everything posted by apbt.drewyoung

  1. apbt.drewyoung
    Thanks to all.
  2. apbt.drewyoung
    MI2 & MI3 should be able to range from 1 to 240, with MI2 being less than MI3.
  3. apbt.drewyoung
    Now here is the program. J3920 Trim Line HMI Touchscreen - no home position.vlp
  4. apbt.drewyoung
    Sorry. Here it is.
  5. apbt.drewyoung
    I wrote a program using a shaft encoder (x2) high speed input. I have logic in my programming converting input pulses from the encoder to display length of material. On the display the length will only go up to 94", when it reach 94" it starts counting down to 0. Why won't it go past 94"?
  6. apbt.drewyoung
    So, are you saying I can't tie each channel to a high speed input and use ladder logic to create a quadrature encoder reader?
  7. apbt.drewyoung
    I have a project with a quadrature encoder. I have a 570 HMI in a remote operator station and all of my PLC connections are in the main enclosure. I am using two IO-DI16 expansion modules, among other expansion modules. Can I use a high speed input from each unit two read the encoder?
×
×
  • Create New...