Jerin

Dear all, I have an application of cutting machine. I am using M91-2-T1 to control the rollers synced with micro stepping motor for feeding the probe. The Stepping is controlled by PWM output as well as the feedback is given to the HSI to stop HSO after reaching the exact preset value. The probe should be cut at 20mm,40mm & 100mm lengths with +/- 1mm. But sometimes the tolerance value comes -2 to + 4. How could I attain the expected tolerance value(+/-1mm)? Is there any programming trick to reduce the scan time? Thanks in advance.

In that boot screen mode what it shows like Status : Idle / No application / something else. Because Ifthere is no application that time also boot screen pop ups. Download your application once again if it is the status. otherwise, If it communicates with the visilogic software, try that initialize & reset option. It may work.

I am using V350-35-T2 PLC. Things I Did: Go to infomode --> entered password --> Entered into infomode --> chose working mode tab --> Chose exit to boot --> checked the parameters and versions Then to return to OS again --> pressed the screen to go to info mode --> and while entering the password it hangs and remain stand still. To make it work again i have to power OFF the PLC and ON. So that it comes to OS mode. I have reinstalled the OS/ boot. But the problem doesn't seems to be rectified. Doubts: Why is it happening? (have anyone faced this before) As I didn't face this problem before, I don't know whether it is a problem or not. Does it cause any other issues in future? (like application lose, Memory content holding etc.,) Thanks in advance.

Thanks Mr. Beekman, But thats also not working for e. so better i prefer square type images for v570. jerin

I am using segoe UI for small fonts. from now "Tahoma is the new segoe UI" Thanks, jerin.

Thanks Mr. Simon, is there any solution for min and max values for mf?(or have to wait until 9.4.1) also is there any trick to make the decimals user definable.(x.xxxxx) As it consumes more space in V350. Jerin

I have created a program in visilogic9.3.0 and now i updated it with 9.4.0. As 9.4.0 doesn't allow to give min and max value for mf in the keypad entry tab it shows many errors. how can i overcome this one.? send some suggesstion... Jerin

Hi, May be this is an old topic. I have done my project in 9.3.0 before. For MF values give the min and max values through the HMI tab itself and that doesn't show any compilation errors. After I download and use 9.4.0 I couldn't set the value which causes so many compilation errors. How could I rectify that. (removing all set values and do it by means of ladder...?).

thats true... better i would use only flat cornered shapes...

Hi, may i force v1040 os into v570?

Thanks Reuvan, In that u send me images with Thanks Reuven, For my account recovery . Then for the reply and the attached images . But I think you are not answered my question may be my english is a bit low or may be i am not understanding. See my attached image the circlic image's edges are not smooth. you also send me some squre type images only. for flat edges no problem. the problem is with curvy edges only. It may because both V570 and V350 has the same pixels 320 x 240. V570 just zoom-in the V350 HMI. May I force V1040 OS into V570. What may be the effect.? does it cause any bad? . Regards, Jerin.S

Hi all, I am using v570 plc, and want to enhance the hmi design, I have tried using the pictures in visilogic image library and it is somewhat pixlating(edges of a curve not smooth). As well the letters are also not sharp. So I decided to design it in Adobe photoshop and download as an image. But that too not upto the standard. Could you give any tips or tricks to do that so. Thanks and Regards,

That was nice one. As i am new to such HMI design iam eager to know how did you did this. Because when i put a simple circle, itself pixelating. But how did you make this flash screen looks is there any software are you designed it in photoshop and add it. I have done that also but that too had the pixeleting effect.

Inputs are working fine only.... The problem is with output only...

dear Sir, I have checked it. v0, v1, vA - +24V & 0V- common of the 24v. there is no power supply terminal is free in my plc.

Dear sir, I have some problem with the output side of the snap-in module v200-18-e4xb. Im using unitronics v570 oplc with v200-18-e4xb snap-in module. I have downloaded my application and checked it through info-mode and also through online, both give my logic is correct. but I didn't get the output in the terminals. i have checked the wiring also. Please guide me... Thank you, S.Jerin. +919944726166