Jump to content

jimbo

Members
  • Posts

    8
  • Joined

  • Last visited

jimbo's Achievements

Newbie

Newbie (1/4)

0

Reputation

  1. Gentlemen, Worked great, thanks much. I do have another issue relative to a problem with a clock function. Can you tell me how to run the RTC in a 24 hr format?
  2. Am having an issue that I feel foolish asking about. Wrote a program on a V130 that requires a data table and had no issues with the table, and program runs fine. However, the times listed in the table are in 12 hours segments, i.e. AM and PM.(using RTC). Customer would like it to be in 24 hour clock, i.e. 00:00 to 23:59. I am completely unfamiliar with the direct and indirect clock functions and am wondering if that is where the answer lies. Would really appreciate someone's help Thanks in advance
  3. Greetings, Am pulling my hair out trying to input the following equation: Q= C*sqrt( (h*pf/Tf) Where: C is a constant - 19214.5 H is an MI (need 3 decimal places(another issue) Pf is an MI (2 decimal places) T is an MI (0 decimal places) The calculation is for corrected gas flow using an annubar type device. having problem with the MI's regarding the decimals.
  4. wrote a program in VisiLogic using windows 8 and saved it. Shut down properly and when I tried to reopen VisiLogic I get the following message: "9Permission denied". I have set the User Account Controls is at a minimum.
  5. I am using a V130 with analog inputs from two flowmeters(4-20mA). I am displaying the flowrates from each meter. I need help adding the flowrates from the two flowmeters and displaying the total flowrate.
  6. Vision 130. Am doing a project where i have to average an analog input for a 10 minute time span. My guess is a filter will do it. But I'm having issues. I looked in the examples in the Help menu, but can't locate what I need.Help PLEASE!!!
×
×
  • Create New...