Jump to content

Fabios

UniStream & UniLogic Beta
 View Profile  See their activity

  • Posts

    84

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Fabios

  1. Fabios
    Unitronics PLC does not have a similar FBD? BR
  2. Fabios
    Hi, what is the useful of the "development mode". I don't find nothing about it in the help file. BR
  3. Fabios
    OK, they are costant value! Thanks a lot!
  4. Fabios
    Hi, the program that I show you is an unitronics example (MQTT). I notice that for the variable that have a "Power up" value, is not possible to see the value in online mode! Is it normal? If yes, what does it mean? BR Fabio
  5. Fabios
    Not at all @Cara Bereck Levy
  6. Fabios
    Yes UniStream can only act as client. With the word server I can imagine that the plc is the client that governs the system, reads values from some clients and writes other values to other MQTT clients. BR
  7. Fabios
    Hi, I'm newbie of the MQTT protocol, I have reading something on internet for a new application with unistream and MQTT protocol. On the help file I read: "UniStream supports MQTT as a 'client' that can both publish, and subscribe, to messages." OK it's clear, so I nead of a local broker (for istance: a raspberry pi and mosquitto). Then I try to study an example of unilogic software where I read: "UniStream can be configure to be a MQTT server." So, what does it mean as "server"? Thanks in advance.
  8. Fabios
    Hi, with vision/samba plc, how is possible to read NTC10K temperature sensor? BR
  9. Fabios
    Hi, Does Unilogic support data transfer to MS Access ? BR
  10. Fabios
  11. Fabios
    Hi Flex, I read this your post: http://forum.unitronics.com/topic/3318-problems-with-unistream-controller/ and Cara says that "UniStream supports more protocols and unlimited sockets…" Best Regards Fabio
  12. Fabios
    Hi, I need to connect a USP-070-B10 Master(client) to 6 remote Modbus TCP I/O Slave (server) (http://www.moxa.com/doc/man/ioLogik_E1200_Series_QIG_v4.pdf). Do I need 6 different socket? May be socket in Unistream are unlimited!!!
  13. Fabios
    Is there chance of success with auto tune FB if the adjustment of temperature is very slow? In a house the temperature variation is very slow, so it needs very time for autotune and may be that it does not work! What do you think about it? I have to decide if use a plc or more thermoregulators, one for each room. BR Fabio
  14. Fabios
    Of course! Simply performed manual disinstallation the previous version and only then start the new installation! Other time this operation was automatic. BR Fabio
  15. Fabios
    solved! Thank you.
  16. Fabios
    Hi, I have installed already Unilogic 1.7 Rev62. If I launch setup of the new 1_9 build 19, appears this window: What can I do? (window7 64 bit) Best Regards Fabio
  17. Fabios
    Hi, is there the chance to create and install on UniStream own UniApps? Fabio
  18. Fabios
    M91 can comunicate in modbus! Here you can download a sample communication in Vintage VB6! http://www.modbus.pl/download/zxy66/v19/mbus.zip Saluti
  19. Fabios
    Hi, In Vision series there is Unitronics PCOM Protocol that able me to communicate with a binary protocol between different PLC. Have we the same chance with UniStream series? Best regards, Fabio
  20. Fabios
    Simon, with Visilogic in Listen mode all work perfectly. My dubt was born when you say: >The IP address that the modem is given on the GPRS connection is usually a firewalled, private IP address, on its own subnet. In this case I wouldn't able to ping modem IP. Instead I'm able!
  21. Fabios
    >The IP address that the modem is given on the GPRS connection is usually a firewalled, private IP address, on its own subnet. Is it possible to ping these IP address?
  22. Fabios
    My be i understand! May be you mean that with plc in listen mode it is no sure system! Everybody can connect to plc! Can you confirm this? BR Fabio
  23. Fabios
    In your example (V120_GPRS_sony_ericsson_wavecom.vlp) you write: "However, in all GPRS applications, the PLC must initiate the GPRS data link by calling the PC." Why this? There is the FB "Listen to Remote Device". If i understand well, with this FB PLC wait that someone call it. So there are 2 possibility: 1) PC call PLC (PLC in Listen mode) 2) PLC call PC (PC in listen mode) Do I missed some concept? BR Fabio
  24. Fabios
    The night brings advice!! Solved!
  25. Fabios
    Any of you have experience about? If yes can you give me some information? Best Regards Fabio
×
×
  • Create New...