-
Posts
84 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by Fabios
-
-
Hi,
what is the useful of the "development mode". I don't find nothing about it in the help file.
BR
-
OK, they are costant value! Thanks a lot!
-
-
-
-
Hi,
I'm newbie of the MQTT protocol, I have reading something on internet for a new application with unistream and MQTT protocol.
On the help file I read: "UniStream supports MQTT as a 'client' that can both publish, and subscribe, to messages."
OK it's clear, so I nead of a local broker (for istance: a raspberry pi and mosquitto).
Then I try to study an example of unilogic software where I read: "UniStream can be configure to be a MQTT server."
So, what does it mean as "server"?
Thanks in advance.
-
Hi,
with vision/samba plc, how is possible to read NTC10K temperature sensor?
BR
-
Hi,
Does Unilogic support data transfer to MS Access ?
BR
-
Hi Flex,
I read this your post: http://forum.unitronics.com/topic/3318-problems-with-unistream-controller/
and Cara says that "UniStream supports more protocols and unlimited sockets…"
Best Regards
Fabio
-
Hi,
I need to connect a USP-070-B10 Master(client) to 6 remote Modbus TCP I/O Slave (server) (http://www.moxa.com/doc/man/ioLogik_E1200_Series_QIG_v4.pdf).
Do I need 6 different socket? May be socket in Unistream are unlimited!!!
-
Is there chance of success with auto tune FB if the adjustment of temperature is very slow?
In a house the temperature variation is very slow, so it needs very time for autotune and may be that it does not work!
What do you think about it? I have to decide if use a plc or more thermoregulators, one for each room.BR
Fabio
-
Solved how?
Share your solution so others might benefit from it.
Thanks.
Of course!
Simply performed manual disinstallation the previous version and only then start the new installation!
Other time this operation was automatic.
BR
Fabio
- 1
-
solved!
Thank you.
-
Hi,
I have installed already Unilogic 1.7 Rev62. If I launch setup of the new 1_9 build 19, appears this window:
What can I do?
(window7 64 bit)
Best Regards
Fabio
-
Hi,
is there the chance to create and install on UniStream own UniApps?
Fabio
-
M91 can comunicate in modbus!
Here you can download a sample communication in Vintage VB6!
http://www.modbus.pl/download/zxy66/v19/mbus.zip
Saluti
-
Hi,
In Vision series there is Unitronics PCOM Protocol that able me to communicate with a binary protocol between different PLC.
Have we the same chance with UniStream series?
Best regards,
Fabio -
Simon, with Visilogic in Listen mode all work perfectly.
My dubt was born when you say:
>The IP address that the modem is given on the GPRS connection is usually a firewalled, private IP address, on its own subnet.
In this case I wouldn't able to ping modem IP. Instead I'm able!
-
>The IP address that the modem is given on the GPRS connection is usually a firewalled, private IP address, on its own subnet.
Is it possible to ping these IP address?
-
My be i understand!
May be you mean that with plc in listen mode it is no sure system! Everybody can connect to plc!
Can you confirm this?
BR
Fabio
-
In your example (V120_GPRS_sony_ericsson_wavecom.vlp) you write:
"However, in all GPRS applications, the PLC must initiate the GPRS data link by calling the PC."
Why this? There is the FB "Listen to Remote Device". If i understand well, with this FB PLC wait that someone call it.
So there are 2 possibility:
1) PC call PLC (PLC in Listen mode)
2) PLC call PC (PC in listen mode)
Do I missed some concept?
BR
Fabio
-
The night brings advice!! Solved!
-
Any of you have experience about?
If yes can you give me some information?
Best Regards
Fabio
-
To use Modbus TCP with unitronics is very easy. With siemens the problem i a little more big. You must to buy cp341-1 and his driver (modbus). Total cost 1500 euro. I have performed this application some years ago and it si not very easy!
I advise you to buy a Operator Panel ( i use sitek) that work as bridge. You spend 400 euro and it is very very very easy!
Best regards
Fabio
Solar Automation
in Jazz, M91 PLCs and U90Ladder
Posted
Unitronics PLC does not have a similar FBD?
BR