Search the Community
Showing results for tags 'vision 230'.
Found 2 results
-
Greetings! Several days ago we installed a new vision 230 pls. Earlier we have the same pls but unfortunately because some technical issue we need to install a new one. So finally we install it, load a old program from previous pls and unfortunately we have some problems. Our pls read the data from electrical and water meters and then send it to e-mail at end of the month. Since we installed a new pls some of the data are missing for example: Flat Cold Hot 01 115.258 0.000 02 59.079 49.297 03 235.354 0.000 04 0.000 0.000 05 153.646 90.032 Tthis zero is not correct data reading. And finally it won't send us data to e-mail . Have you some ideas why on the same plc and with the same program we have this problems. if you need additional info please ask! program is attached. 16.vlp -
Good afternoon, Is it possble to upload a PLC program from a connected PC programmicly? I've using the Vision 230 in a peice of equipment with 100+ installations around the world, recently we added several features that we need to distrubute to all the PLC's From a hardware standpoint, we have a supervisory computer connected to #1 RS232 port. We distrubute the PC Superviory software via windows click-once, I'd like to build a batch file that would run post appilcation installation to update the PLC. 1) has anyone every done a project that the PLC code is distrubuted with a Visual Studio based Application? 2) any example code available illistrating this process? Thanks in advance. Aaron