Search the Community
Showing results for tags 'PC'.
-
Hi, I'm using Unitronics PLC JZ20-J-T40, and ZView SCADA. I have successfully downloaded my program into PLC, and tested communication via usb (Serial), and via Ethernet (MJ20-ET1). It's all working properly. Problem begins when i try to connect my PLC to scada PC. With USB everything is working normally, but it's not an option for me to work with usb connection. I want to work with Ethernet communication between PLC and SCADA. What should i do to make it work? Regards Nikola Ljubinkovic
-
Hi, I have a customer that is looking to use a Unitronics PLC to add additional outputs to their existing system. The main system runs on a .net application, so the PLC would be mainly used to set/reset a MB or Output at a particular time. The response time needs to be pretty fast, likely a few milliseconds from PC send to output state change. Which communication method would be the fastest or would they be roughly the same? - PCOM - .NET driver - Custom protocol with short command sent from PC and received via FB protocol scan. Just getting a feel on how I should build the PLC communications class. Thanks,
- 2 replies
-
- communications
- pc
-
(and 1 more)
Tagged with: