Search the Community
Showing results for tags 'V350 IO Expansion'.
Found 1 result
Good afternoon all, I am new to the Unitronics line. I have what are probably a couple of simple problems, but haven't found the solutions in help or in the forums. 1) I am trying to set up a V350-35-TR20 with an IO-ATC8. I have added the module to the rail and configured 8 type K tcs (Addresses 32-39). These inputs do not transfer down to the Output Window (obviously, on the 'Inputs' tab). Also, in Hardware Configuration, the IO monitor only shows the available IO from the V350 (12 I, 8 O) - it does not reflect the additional 8 inputs from the ATC8. The D.O.s that are configured in the Configuration Editor do transfer to the 'Outputs' tab of the Output Window. What am I missing to see these inputs outside of the module configuration screen? (FYI - an EX-A2X is physically in the system, not shown in software) 2) I cannot copy the file that I am working on at work onto an external drive to continue working at home. Is this by design? Computer: Win7 64-bit Visitronics rev: 9.5.0 build 0 Thanks for any help! Rich