Search the Community
Showing results for tags 'communication problem'.
Found 3 results
Hello, i'm on visilogic 9.6.00 with a PLC V570. I can't send any mails. The socket initialization is done but the socket connection is 0. I use a temporary email to test my program. firstname.lastname@example.org PWD: Plsystems00 126.96.36.199 port: 465
Hello all, We would ask you for help or advice, we have some problems with communication between this two PLC-s V1210 ( moduleV200-18-E46B) and remote I/O EXF-RC15 via CAN bus. We control with 5 servo motors (Yaskawa), two of them is controlled by V1210 and other 3 by EXF-RC15. Everything keeps smooth when we control only 2 motors which are attached to V1210. Problems starts when we finish programming some of other three motors controlled by EXF-RC15 - (when we need communication between this two PLC-s’9. For example when we push on run bit for one motor (Button on V1210 display), its pushes on all other motors run bit etc. We send data about run bits from EXF-RC15 to V1210, but cant send same in other way and for that reason RC15 does not send to V1210 info when run bit is off ? At the and we solved problem with auxiliary bits through ladder logic but we really want to know what is problem. In attachment u can find both programs, i hope that you will look at it, and give us some advice... We would really appreciate any kind of help.... RC15.vlp V1210.vlp
I am trying to communicate between my visilogic PLC software and V350 series PLC controller using direct USB programming cable (USB A to USB mini B). I have downloaded and installed the mini USB driver from unitronics website. but am continuously getting the same problem "Windows found your software but encountered a problem while installing it" Please find my attached Screenshot ..