Search the Community
Showing results for tags 'download'.
Found 11 results
-
Does anybody know if there is a gadget on Unicloud, or some way, to download all the data uploaded? Ideally into one single CSV file, with time stamped rows.
-
I have just connected up Unilogic PLC USC-B5-T24 to do test. I have updated firmware and downloaded just a couple of lines of logic which was fine . I then changed those lines and now just get error when trying to download. Can anyone help.
-
Dears All, just a quick question...I create 3 screens: MAIN, secondary A and secondary B. Main can "load" one of the secondary screnns by two buttons that include the "load screen" action (no retained bit to load the screens). If during a test in the PLC I select a secondary screen and I found that some modification is needed in the program and I done these modification and I do "download all" ...what should be the screen that I have to see in the PLC after the reboot?...main or the secondary where I was? I done this question because the screen that I have, after the reboot by "download all" is the secondary; if I turn OFF and ON the PLC I have the MAIN as first. thanks
-
Hi I have Unitronics Jazz Jz-20-T40 PLC. I have all the newest software and PLC system. When i power ON my PLC, and then using USB i connect it to my laptop, connection is working fine and i can see PLC from laptop. Then, when I download PLC Program to my Jazz PLC, it downloads normally, and as it should, PLC reboots. On my other Jazz PLCs it turns ON again, and it's still connected to my laptop. But, on this specific model, when i finish download, and try to connect to it again, it displays 4-5 messages that says restart U90, PC and so on. When I try to connect to it again, I get same message. I tried to restart U90, still the same. I really don't want to restart laptop, so I tried to unplug and plug USB. It shows me that i don't have needed drivers for this device. I click update device software, it says it's already newest, as it should. Then i try to install from U90, it says that I already have it. Then I unplug and plug again, and everything works normally. Every time I download, i need to unplug and plug USB twice, before I can again debug my PLC. It just needs to be reconnected twice, without installing anything at all. It confuses me a lot. Please help. Thankful in advance, Nikola Ljubinkovic
-
Hello world, some years ago there was possible to download a complete Unitronics documentation for all Vision products in one package. Now I tried to find updated version but I did not succeed. Is there some way how to get it? Thank you very much, Michal.
-
Hi - I have an Unistream panel connected to an UAG-XK-125 with 4 relay cards on the rail (UID-0016R's). My question is when I download a new program to the panel are the UID-0016R's identified or written to in any way? My concern is that I am downloading, then disassembling the UID's (disconnecting the wiring connectors)and then shipping them somewhere and then reassembling them again. I won't be there when it is all re-connected. Do the UID's need to be reconnected in the same exact order they were disconnected (RLY0,RLY1,RLY2,RLY3) - will the I/O tags move or anything else be changed? They are all the same type UID-0016R. Or can they use any UID-0016R in any order? Thanks.
-
Does anybody know why this is showing up?. This is the new trend after I got the latest version of Vicilogic (9.8.31). Best regards.
-
Hello! I have V560 and Netgear wnce2001, the idea is to make a wi-fi connection and using the connection to download programs from PC to PLC. Netgear is setted up to use static IP and it is connected with V560 using LAN cable, Ethernet card is added to the PLC. Unfortunately, I have some unclear points. Firstly do I need to use TCP/IP Card Init and how to set up the block? The parameters (IP, Subnet Mask, Gateway) inside the TCP/IP Card Init must be equal to the parameters inside Netgear? Do I need to use TCP/IP Socket Init and TCP/IP Connect/Close? Thanks! -
I am building an application that I am using the binary image/ switch on. I have a lot of these as I am using them as status indicators for my IO. The problem is that when I do a download I get a warning for every one of these the states the font can't be found. I have not option to choose a font. I have this same problem with a few of my buttons. Is there a work around or is there someting that I am missing? -
The amount of download warnings that popup when downloading is rediculous. With these warnings, I can't multitask, I have to sit there and watch the download process. The v570 download isn't too bad but when downloading to the v1210 it is painful to say the least.
-
Hello! I can no longer download to the V570 via ethernet only via COM1. With 9.4.0, at the beginning happened once in a while and now I can no longer download the program in any way for LAN, I have to connect the serial network. I get notifications that communication fell after "Build info DLUs tables." The remote operator, online test from visilogic, webserver, Modbus, and other communication protocols are normal. I already sent the data to support and am waiting for support. Somebody had something similar, or any thoughts?
