Jump to content

Search the Community

Showing results for tags 'vi̇si̇logi̇c'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Our Community
    • Come on in!
  • News and Announcements
    • Latest Release! UniLogic Spring 2020--Loadcell, BACnet IP Server and more!
    • VisiLogic:9.8.64 - Link to mobile app, Ladder: 2x the Space!
    • New!!! ***** U90 Ladder*****
  • UniStream HMI + PLC Programmable Controllers & UniLogic Software
    • UniStream: Hardware
    • UniLogic Software
    • UniLogic UDFBs
    • Industry 4.0, IioT, MQTT, OPC UA
  • Vision, Samba, Jazz and M90 PLC + HMIs & Software
    • Vision & Samba PLC + HMI Controllers & VisiLogic Software
    • Jazz, M91 PLCs and U90Ladder
  • Software Utilities
    • SD Card Suite
    • Remote Operator
    • Remote Access
    • DataXport and DataXls
    • UniDownloader
    • UniOPC
    • UniDDE
  • Utilities for .net and Visual Studio
    • Unitronics PCOM Protocol
    • COM Object ActiveX .dll
    • .NET driver
  • Project Design
    • ...I have a project...what hardware do I need?
  • User Application Stories
    • Just finished a great project?
  • Tips and Tricks
    • Best Programming Practices
    • Tips and Tricks
  • Job Board
    • Projects seeking Programmers
    • Programmers seeking Projects
  • General Discussion
    • We're Listening...
    • The Lounge
  • News and Announcements Copy

Calendars

  • Community Calendar

Blogs

  • Unitronics' Blog: PLCs, HMIs and more
  • Saragani's Blog
  • Simon's Blog
  • Ash Neilson's Blog
  • Joe Tauser's Blog
  • Unitronics en Español
  • Powered by AMPS
  • Alldrives UK's Blog
  • Unitronics, Howman Style
  • PLCNewbie's Blog
  • Telestar Automation Blog
  • Webinars Collection
  • Tim's Corner
  • Blog
  • TELESTAR (Italian)
  • i4 Automation
  • i4 Automation (UK)
  • Unistream UDFB's

Categories

  • From Headquarters: Sample Applications
    • From Headquarters: VisiLogic
    • From Unitronics: U90 Ladder applications
  • User-submitted Applications
    • From Users: VisiLogic applications
    • From Users: U90 Applications

Categories

  • Articles
    • Forum Integration
    • Frontpage
  • Pages
  • Miscellaneous
    • Databases
    • Templates
    • Media

Categories

  • New Features
  • Other

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

Found 81 results

  1. Running Win XP Home with SP3. Visilogic version 9.0.4 and the latest version both give Application Error and will not run. Any suggestions will be appreciated.
  2. EX-RC1_Mod.vlp View File Adaptor program for connecting remote Visilogic IO to Unilogic PLC. EX-RC1_Mod.vlp OTIS-UNI-050720.ulpr Submitter bob62j Submitted 05/27/2020 Category From Users: VisiLogic applications  
  3. We have about 50 Vison PLCs currently in operation in many projects. A few weeks ago we started to switch from Visilogic 9.8.64 to 9.8.90. We noticed that the PID functions were not working anymore. After a long time of troubleshooting we realized that we had to delete all "PID A.TUNE Config" blocks and rebuild them again. Is this a known problem? Is there another possibility to fix this?
  4. Hi, in my current project I have a button on my touchscreen. If this button is pressed, MB33 is set and afterwards MB 10 should be set too. But, as you can see in the image below, the execution of the net stops before MB10. Basicly I copied this structure out of this tutorial : https://www.youtube.com/watch?v=8RyFPPE3Hdk&feature=youtu.be&t=572 In the tutorial they use the same sequence of contact and coil to turn a "LED" on the touchscreen on and off. Any ideas, why it doesnt work for me?
  5. Hi everybody, I have long time problem with exporting of operands description. I use VisiLogic 9.8.90 now, but the same was in versions before. When I tried to do Edit -> Export operands descriptions, VisiLogic hang down. I get a message: "Run-time error '-2147221164 (80040154)': Class not registered" (in Czech in my case - so it is Winodws information). Next time I start Visilogic. I get a message: "VisiLogic was not shut down properly. Press OK to recover." (completely in English - VisiLogic information). It is not depending on hardware used in project (all my Vision Enhanced PLCs). When I tried to do Edit -> Import Operands Descriptions, VisiLogic run as I do nothing. I don't use MS Office - if it is important. Is anybody here who know what to do? Thank you very much Petr
  6. Hello, I want to create a time meter on my program. The principle would be to activate this time meter only when my pump Is working I don't find how can I make it on Visilogic.. Can you help me ? I'm working on a Vision V570 Thank you
  7. Hi guys, we have connected our SAMBA to WLAN and can access it now through WLAN with the Visilogic software. Now we want to export data from the Samba through WLAN to a PC. For example when a new User enter his name on the touchpad of the samba, the samba should send this information to the PC. How can we do this? Is there any tutorial on a task like this? Greetings
  8. Hello everyone! My question is how i can import h&w config my project? I use SM70,i have already export .ulri file on my old project,but i cant find any import selection on my new visilogic project... Thank you for everything! ❤️
  9. Hello, I am struggling to understand Visilogic's MODBUS tools. Say I would like to turn a light on and off from the master PLC, while the output is attached to the slave PLC. What would be the best function block to do this? I keep using the FB #5 and I will get the bits set high, but then they will stay high. I am practicing so I can use PTO utilities to control steppers instead of lights. First, I need assistance in understanding why things like MODBUS FB (5) sets and doesn't reset. The attachments are just HMI lights telling you if you get the commands from the Master PLC. (You get them only if the 2 bits begin in RESET using the online mode) Otherwise, O5 in the picture is the LED I am trying to turn off and on from the master. Thank you! MASTER MODBUS TEST.vlp SLAVE MODBUS TEST.vlp
  10. Hi, i have a vision130 and recently download the latest version of visilogic but when i go to connection-communication & OS- get oplc information- check, at the end, it stops in step 2 but i dont if it has to be about the version of the visilogic or if i have to download a previous version. hope you can help me, thanks
  11. Hello to all. I am working on a project in which I will only get PLC data to an external control system, we will do it in MODBUS. Everything works correctly, but I find two problems: The addressing mapping is 1: 1 accessible from MODBUS, so they could read any record. The same is reproduced in writing, so that accidentally (or not) they could overwrite important values of my program. Could we limit the reading to a certain number of records? Could we limit the writing? Thanks in advance!
  12. I want to create an alarm list in my HMI. I have created the alarm group and it shows the alarm, but I don't want to access the List of alarms that Unitronics gives by default, I want to see a quick list in my HMI of active or unrecognized alarms using a List Text or some better alternative. If there is no way to display in your own list, I would like to know how to display the alarm list automatically when an alarm is activated. I am using a Unitronics V1040 in Visilogic 9.8.79 Sorry my language is Spanish and this was translated
  13. Hello! I am trying to create a program that will extend a cylinder for 10 seconds with valve 1, retract after the 10s and have a running count of the cycle after it is retracted. While doing this, I want valve 2 to ‘dump' the air after valve 1 has been on for 5 seconds so there is no pneumatic force in the extend position after the initial 5 seconds of valve 1 opening. Is this possible? Any insights would be greatly appreciated! I am using VisiLogic to write my program and V130-33-T2 hardware. Please advise!
  14. Hi guys! I am trying to install the latest version of VisiLogic, but it is not possible in my Windows 10 x64 (PRO) laptop. Trying in a VM with Windows 7 works fine... Any idea?
  15. ANSWER : I made it work! When I tried to connect basic 4 wire telephone cable to both end (modem and plc) it worked immediately. Seems that DB9 connector that came with modem kit had already cross crimped pins inside it. Guys help please, I can't initialize COM 2 so that I can connect my modem (Cinterion) to that port so that I could send message when error happens. I added few pictures so that you can see that my SB82 never goes active, why is that? I am using method stop - download - reset so that power bit goes on but port is not initialized Can port be initialized even if I don't have any device connected to that port? I am using Visilogic 1210 and Cinterion modem New edit: I found this in Cinterion documentation: "Now you can connect the modem to the PLC using the 9 Pin connector MJ10-22-CS76 via cable 4 wires." Does anyone has wiring schematic for this "9 Pin connector MJ10-22-CS76 via cable 4 wires". Here is how I connect modem to visilogic, is this correct?
  16. Hi there, this is my first time working with unitronix plc and I have some problems with understeanding how does modbus communication works. I am using visilogic 1210 plc and I want to read some parameters from Iskra FPC400. I want to use modbus because FPC400 only supports rs485 communication. First I did set up com port and configured modbus. (As you can see from pictures that I included) I want to read 27 parameters from FPC400 (As you can see from picture that I included, I want to read 27 parameters from adress 4112 - 4139 ) and store them in 27 different variables in my plc. (MI4000 - MI4027) As I understood, I need to set start of vector for reading variables as 4112 and length needs to be 27, and start of vector on my plc is 4000. Does this means that program will read 27 parameters and store them into my plc starting from MI 4000 to MI4027?
  17. Greetings all. First round setting up a RTD and, after reviewing forum posts here, I believe I am more confused than before... but likely an easy answer for most around here as I'm much more of a software guy. Our setup: V700 Model with an RTD going to a IO-ATC8. I do not have the RTD model# on me at the moment (typing this after hours but can provide tomorrow) but I know that the RTD contains a Prosense XTH-0300F-PT1 transmitter (0-300 degree F even though the RTD itself is capable of a much larger but unneeded range) I understand that the IO-ATC8 is 14bit. The confusion: I've seen forum posts where the linearization block references the "resolution @ 4-20mA" stated by the RTD/transmitter (I cannot locate this on the spec sheet for the model listed above, or maybe it's called something other than "resolution" but means the same thing?). I've also seen where the linearization is based off the 14bit module (3277 - 16383) - which is in line with what we did with level sensors... aaaand I've seen where, in other cases, an RTD does not require additional linearization (other than dividing by 10, but I assume this is for 10bit setups?). Any advice would be appreciated with a layman's outline of rationale. Cheers!
  18. So on the V700, whenever a numeric keypad is pulled up, I have to touch the top half of the button to get it to register. this can be kind of frustrating, because the buttons are long and narrow and it usually takes a couple tries to get it to work. I know its a software issue because there's a border that surrounds the touchable area when the button is pressed and it only covers about 60% of the button. when the button is pressed in the center, it does not register.
  19. Good day, Please find attached some images with the problema that occurs at the time of oppening a Project in VisiLogic versión 9.8.65. The first error that appears is the "Load 12Type mismatch" and when you click to the "Ok" button and try to open another display it appears the second message "Run-time error '13': Type mismatch". I have read a post where the response was to put a DLL in the VisiLogic folder. I have tryed this solution but it does not work (post was from 2015 and other VisiLogic versión). Let me know if you have some solution! Thank you,
  20. Does anybody know if Vision controllers (ie V130) support Modbus TCP or do they support the Modbus RTU over TCP implementation. The difference is that the first follows the original Modbus TCP frames (ie no CRC) while the latter encapsulates the serial RTU framing sent over TCP media. Which one is supported by Vision and the other Unitronics controllers?
  21. Hello there, i'm trying to find a way to Initialize the TCP/IP card with the IP,Mask,default Getaway from the data that i initially put in the device through the Information mode. I found the Retry and Timeout Registers (SI 101,102) but i can't find the IP, Mask and default getaway to Dynamically Initialize the TC/IP card. I don't want to have different .vlp's for each device. P.S. i also saw the MI option but it would put unnecessary complexity to the ladder program (need to have two modes in start up etc.). thanks in advance, Nassos
  22. Today I had a problem with a timer from a big program made in Visilogic. 2 months after downloading a new program into the V130, a timer changed itself from 00.00.00.09 to 99.59.59.99. The timer is only used by one contact and one coil. Did anyone ever experienced this too? And how can I prevent it from happening again? Thank you!
  23. Hi everyone, We want to report the data records that we keep daily via e-mail at the end of the day. We have implemented the shipment with the help of examples but we have problems sending the data records in the form of an excel report. Columns and rows are interfering. Thanks for yours support ...
  24. I am trying to communicate between my visilogic PLC software and V350 series PLC controller using direct USB programming cable (USB A to USB mini B). I have downloaded and installed the mini USB driver from unitronics website. but am continuously getting the same problem "Windows found your software but encountered a problem while installing it" Please find my attached Screenshot ..
  25. Hello, I am using a V570 with V200-18-E2B snap IO. Software version is 9.8.65 I am linearizing a pressure sensor (4-20 ma) to be able to read from 0 to 30.00 inHg. As you can see in the image below I made y2 a value of 3000 to be able to display it with 2 decimals in the HMI. However I still need to get it with 2 decimals into a Float (MF) to be able to convert this value to mbar by multiplying it by 33.86. So basically what I can't figure out is that if I get a value 3000 (30 inHg) I need to be able to put into a float 30.00, If I get 15 should be able to put into a float 00.15 and so on. Is this something that can be done by using Num to Ascii and putting the ascii value into 2 MIs? then using those 2 MIs into a float convert A+b/n? I am hoping somebody point me in the right direction in how to achieve this. Thanks in advance
×
×
  • Create New...