Jump to content
Sign in to follow this  
Terry Luu

Connect V120 to OPC Systems.Net using UniOPC

Recommended Posts

Hi all,

I'm new bee . I'm trying to make a connection between PLC Vision 120 to scada software OPCsystems.NET. But I can not found where to define a tag and maping a connection define such as Node name, device name, items name, server name ...

Could any one have play with this please help me?

many thank!

Terry luu

Share this post


Link to post
Share on other sites

Hi,

As I understand you wish to use Unitronics OPC Server for communicating V120 with the SCADA.

You can download UniOPC server from: http://www.unitronics.com/Data/Uploads/software%20utilities/UniOPCSetup_201.exe

Then you can find in OPC help file detailed explanation how to use the UniOPC Server.

Basically you need to configure the communication channel (57600, 8 , N , 1) and add PLC.

Please note that there is no automatic browse to operands - You will need to add the variables/tags manually.

Review help topic "OPC Client: Item Syntax"

Share this post


Link to post
Share on other sites

Hi,

As I understand you wish to use Unitronics OPC Server for communicating V120 with the SCADA.

You can download UniOPC server from: http://www.unitronic...PCSetup_201.exe

Then you can find in OPC help file detailed explanation how to use the UniOPC Server.

Basically you need to configure the communication channel (57600, 8 , N , 1) and add PLC.

Please note that there is no automatic browse to operands - You will need to add the variables/tags manually.

Review help topic "OPC Client: Item Syntax"

Hi

Yes, I intend to using Unitronics OPC server for communicating V120 with the SCADA, I already connected V120 to PC with RS232 cable. and also connected to OPC SERVER but for SCADA I using an other software from OPCSystems.NET. I can't not find a way to configure and how to hook-up signal from PLC to SCADA software through OPC server. So please help me.

Share this post


Link to post
Share on other sites

Dear all

when I use uniopc server to link my vision 120 plc

all are possible ok.

because I can see "run server "and" new client connected "message

 

But how can i add new item under opc address browser

 

I run the HMI are Rsview

 

 

Tks

 

 

K Ngai

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...