Jump to content
2rlp

SD Card & PLC application

Recommended Posts

Hi,

Had done a project using V570, due to some reason, the program in the PLC was corrupted??? I need to send the same program on a SD card to the client. I do not have a V570 with me. I do have a few V130s. Now without a PLC, can the program be dowloaded from Visilogic or any other utility onto a SD card? If yes, then HOW?

Kindly reply ASAP

Ron

Share this post


Link to post
Share on other sites

Hi,

If you wish to send the customer project which will be downloaded using SD card then follow the below steps:

  • Open the application using VisiLogic
  • Under Project menu select the option "Create project files..."
  • In the first Tab "Clone File.." if you wish to create only application file then select the .V57 option and click on create file
  • Then you need to put this file .V57 in the SD card in folder User_App. (Basically you can send the customer the SD card or send him the file and he will put it on his SD. (Make sure the customer SD card is formatted properly)
  • Now the customer can insert the card to the PLC and from Info mode --> SD --> Application -->upload to PLC

After performing the above steps the application will be loaded to the PLC.

Another option is to use the Unidownloader.

Share this post


Link to post
Share on other sites

Hi,

If you wish to send the customer project which will be downloaded using SD card then follow the below steps:

  • Open the application using VisiLogic
  • Under Project menu select the option "Create project files..."
  • In the first Tab "Clone File.." if you wish to create only application file then select the .V57 option and click on create file
  • Then you need to put this file .V57 in the SD card in folder User_App. (Basically you can send the customer the SD card or send him the file and he will put it on his SD. (Make sure the customer SD card is formatted properly)
  • Now the customer can insert the card to the PLC and from Info mode --> SD --> Application -->upload to PLC

After performing the above steps the application will be loaded to the PLC.

Another option is to use the Unidownloader.

Thanks Ofir, will try out.

Share this post


Link to post
Share on other sites

Hi,

Every time I try to use Create Project Files, I get a message Runtime Error 28... Out of Stack space. I am running Visilogics 8.6.2 on Windows XP SP3.

Pl respond

Thanks

Ron

Error.pdf

Share this post


Link to post
Share on other sites
Hello! I also need to send a project but do not want the customer in any way see the program. When I want to create a file .C13 not take me PLC ID SW9. Join the numeror and when I leave the cell to enter the ID number entered password is cleared.

I need to code the program so that the program does not work for another PLC and can not open. From already thank you very much, I hope you understand me and I can help.

Share this post


Link to post
Share on other sites

I think that UniVision Licensing can help you create a program that runs on one PLC, but doesn't run on another (You will also need to add some kind of a support for it in the ladder).

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...