Jump to content

Recommended Posts

Good morning

I am still fairly new to Visilogic so would like some advice about a new project I am planning.

I currently use a V570 as a pressure controller, as the process runs, certain parameters are recorded to an MI and results are displayed at the end of the cycle (start pressure, end pressure and the pressure drop is calculated and displayed).

What I would like to do is to record these parameters along with a user inputted serial number into the memory of the V570 (using data tables?).

I would then like to transmit this data wirelessly after each test or 5 tests to a PC.

Is this possible with the V570?

Thank you in advance and Merry Christmas

Russ Edwards

Share this post


Link to post
Share on other sites

It sure is. Obviously you will need to find a wireless transmitter that is compatible with something you can get on the V570 (RS232.RS485,Ethernet, etc).

Only word of caution is about speed. The analog inputs on the snap in modules in general have better performance. Make sure the conversion times and filtering are acceptable for your application. If you have a slow process there are no worries. If all of this happens in less than a second you will have to do your homework.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...