Jump to content
Sign in to follow this  
Jere

VisiLogic 8.6.2 HMI problem

Recommended Posts

I'm using VisiLogic 8.6.2 to program V130. My problem occurred after updating to newest VisiLogic. My OS is windows XP.

The problem occurred during editing HMI Displays jump conditions. Before update while editing HMI's I could see "frame" (with V130 buttons etc.) around the actual display and below were the jump conditions. After the update I can't see the "frame" and the jump conditions anymore (see attached screenshot). So I can only see the display. If I press the HMI button from toolbar, the frame and the jump conditions flash on the screen for a second and then disappear. If I press the HMI button repeatedly, the VisiLogic fails and closes.

I can edit normally the display but I can't edit the jump conditions for the displays. What could be the problem? I've uninstalled the VisiLogic and deleted the remaining folder from program files. After installing the VisiLogic again the problem persists.

post-270-098029600 1288080380_thumb.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...