Jump to content

Recommended Posts

I am building an application that I am using the binary image/ switch on. I have a lot of these as I am using them as status indicators for my IO. The problem is that when I do a download I get a warning for every one of these the states the font can't be found. I have not option to choose a font. I have this same problem with a few of my buttons. Is there a work around or is there someting that I am missing?

Share this post


Link to post
Share on other sites

Is it possible for you to put a copy of your program on the post? I do the same thing you do on most of my touch screen programs where I put binay images for an easy IO check and I have never recieved a message like this, but I would be willing to examine your program to see if I can figure anything out.

Keith

Share this post


Link to post
Share on other sites

Two suggestions, as this error really can't happen under normal circumstances.

1) Re-check to confirm what the warning is referring to. Visilogic warnings can often be a bit misleading and can sometimes refer to something else and fool you, particularly HMI warnings when there are many elements on the screen.

2) If it turns out that the warning really is for the font on a binary image switch, then you might want to consider re-installing Visilogic. Something is seriously wrong.

Share this post


Link to post
Share on other sites

I would agree that there is something seriously wrong. I also have Visiologics installed on my laptop and get the same warnings. If I copy the screen into a new project there are no warnings.

But when I do this Visiologic gives me a ton of crash reports.

Share this post


Link to post
Share on other sites

Please either attach the vlp here, or contact the support through email with the vlp attached.

The R&D can easily find the problem.

Please also provide information about the version of Visilogic you are using.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...