Jump to content
Sign in to follow this  
Rene

IEC 60870-5-104 protocol support

Recommended Posts

Hi!

Is there any ideas how V1040 PLC can communicate through TCP/IP network with SCADA software using the IEC 60870-5-104 protocol? For example the SCADA must have access to read 20MI-s from V1040.

Is the IEC 60870-5-104 protocol supported?

Share this post


Link to post
Share on other sites

Of course i can use Modbus in other cases. But our national power grid manager use only IEC 60870-5-104/101 protocol in their central SCADA systems (80-90% of the European power grid data communication systems based to the IEC 60870-5-xxx protocol), and i must transmit to power grid manager some data from my V1040 PLC.

If there is no direct support to IEC protocol, the easiest way is to me is to use the separate protocol converter unit (Modbus TCP to IEC 60870-5-104 protocol).

Rene

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...