Jump to content
Sign in to follow this  
Vidmas30

Serial connection

Recommended Posts

Good evening,

Our customer wants PLC to count impulses of four machines, and to have results (count per minute) in PC (Excel). So I think cheapest solution would be Jazz connected via serial cable to PC DDE server. I want to ask what max length of serial connection cable can be used? Thank you!

Share this post


Link to post
Share on other sites

Good evening,

Our customer wants PLC to count impulses of four machines, and to have results (count per minute) in PC (Excel). So I think cheapest solution would be Jazz connected via serial cable to PC DDE server. I want to ask what max length of serial connection cable can be used? Thank you!

As a general rule of thumb, RS232 is not recommended over 50 feet.

Share this post


Link to post
Share on other sites

If you can live with a slower data transfer rate, you can increase the distance. Assuming you only need to collect results once or twice a minute, you could set a rate of 1200 baud, and run your RS-232 signal a few thousand feet without any problems. Alternately, you could put a $60 RS-232 <-> RS422 converter at the PC end, switch the DIP switches to RS-422, and run your data half a mile at 9600 baud.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...